Prettiest seatpost?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

DeLuz
Posts: 405
Joined: Fri Dec 04, 2009 2:30 am

by DeLuz

joejack951 wrote:
Mon Sep 27, 2021 12:39 am
DeLuz wrote:
Sun Sep 26, 2021 9:03 pm
Also looking for a nice polished silver seatpost and the Ritchey Classic is appealing.
I’ve never had a bad experience with a Ritchey seat post. I have one on all three of my drop bar bikes. The classic frame has the ‘Classic’ seat post.
What stem is that?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



CampagYOLO
Posts: 731
Joined: Thu May 06, 2021 3:58 pm

by CampagYOLO

clrdr wrote:
Mon Aug 16, 2021 11:24 pm
Seeking recommendations for a road seatpost that will look :thumbup: Does anyone have a recommendation for a colored anodized post that's decent and relatively lightweight? Or polished aluminum? Or just black anodized but with a graceful profile. Preferably

<$150
two-bolt/ easy tilt adjust
If you're happy with red anodized bits, there's this:

https://www.ebay.co.uk/itm/302250200535 ... 1092650486

I have one, it's decent and it's well under your budget.

joejack951
Posts: 1162
Joined: Fri Feb 18, 2005 6:50 pm
Location: Wilmington, DE
Contact:

by joejack951

DeLuz wrote:
Mon Sep 27, 2021 6:48 pm
joejack951 wrote:
Mon Sep 27, 2021 12:39 am
DeLuz wrote:
Sun Sep 26, 2021 9:03 pm
Also looking for a nice polished silver seatpost and the Ritchey Classic is appealing.
I’ve never had a bad experience with a Ritchey seat post. I have one on all three of my drop bar bikes. The classic frame has the ‘Classic’ seat post.
What stem is that?
Hand-polished Kalloy Uno. It was black originally. I could find a -17 degree, 31.8mm stem in polished silver so I got to work. The Ritchey Classic stem is very nice but only -6 degree and never looked quite right with the horizontal top tube. I have pics with that stem floating around if you are curious to see.

Several have commented that the ‘fat-ness’ of the Kalloy Uno isn’t a great match for the skinny steel tubes. I agree but for the price and weight the Kalloy made a lot of sense. I am working on a custom stem which is nearly ready to release for prototypes. It addresses all of the aesthetic flaws of the Kalloy while mostly maintaining the low weight (~125 grams at 110mm anticipated weight).

nowtaps
Posts: 35
Joined: Mon Mar 08, 2021 4:05 am

by nowtaps

The Nitto UI-22 is -17deg 31.8mm stem in polished silver finish, kind heavy though, ~160grams if I remember correctly

joejack951
Posts: 1162
Joined: Fri Feb 18, 2005 6:50 pm
Location: Wilmington, DE
Contact:

by joejack951

nowtaps wrote:
Tue Sep 28, 2021 10:22 am
The Nitto UI-22 is -17deg 31.8mm stem in polished silver finish, kind heavy though, ~160grams if I remember correctly
That would have been a lot easier! But definitely more expensive (~$80 vs. $25) and quite a bit heavier. I found a site quoting the 110mm length at 175 grams.


Post Reply