Standert Triebwerk Custom Build Thread

[Aufi]

Hello there,

I will soon be building up my custom painted Standert Triebwerk again, with a paintjob like that It is a very special bike to me, so i thought I would archive the Build somewhere - here!

https://ibb.co/F06cD2F
https://ibb.co/c6zMHRd
https://ibb.co/W3CKJZK
https://ibb.co/KxjN8y7
https://ibb.co/tBB8TYZ
https://ibb.co/LtXbNpk
https://ibb.co/mv1h5fx
https://ibb.co/nQH8dyr
https://ibb.co/3rjRcdH
https://ibb.co/HXFLNQR


It is still in the Polishing Stage, full pictures will follow soon. Here is the parts list:

Frame: Standert Triebwerk Mach 3, Custom paint
Fork: Columbus Futura, Custom paint
Headset: Chris King i7, Patriot
BB: Chris King T47 DUB, Matte Slate
Crankset: Quarq Dub Arms, Left Arm Painted
Spider: Quarq Dfour91
Chainrings: DA 9100 52, wolftooth 34 Oval
Stem: Ritchey WCS 220 110MM -17, painted
Bars: Prime Doyenne Alloy Aero 38cm, painted
Seatpost: Hope 27.2 Carbon, painted
Brakes: KCNC CB3 Angle Silver
Cables: Jagwire Elite Link & Slick Polished Cables
Shifters: Sram red eTap 22, Blip modification under the hoods
FD: Red eTap
RD: Red eTap, Cage custom painted
Cassette: 105 5800 11-32
Chain: DA / HG-901
Hubs: CK Classic High Flange Black
Rims: Mavic Open Pro UST 32H
Spokes: 48 DT Revolution 2.0/1.5, 16 Competition 2.0/1.8 (DS)
Nipples: DT Brass
Tape: Schwalbe
Valves: Mavic UST with Peaty's Lock ring & Valve Cap
Sealant: Maxxalami Wurstwasser
Tires: Challenge Paris Roubaix HTLR 27MM
Skewers: Generic Chinese Tune copys
Saddle: Syncros Belcarra V 1.0, Tan
Pedals: Look Keo 2 MaxCarbon
Bar Tape: Fizik Vento Solocush, Black
Bottle Cages: C'Dale Speed Cage Carbon, Custom Painted
Topcap: Enve, Custom painted
Spacers: (1 2.5mm above stem) Custom painted
Bar Plugs: C'Dale Alloy, Custom painted
FD Clamp: KCNC, Black

If I am missing any important Parts, or you have any suggestions, let me know!

I will continue this Thread once i get the Frame back.