2021 Canyon Aeroad

[bratz]

Anyone know if I need to get shorter bolt for the rear caliper if I remove the spacer for 160mm to use 140mm rotor?

Sent from my SM-N975F using Tapatalk

Some said no. I did buy new ones just to be safe since the manual has changed for 8170 and they’re just a few euros anyways…

Replaced 140mm rear. Existing bolt fits without the spacer for 160mm rotor

Sent from my SM-N975F using Tapatalk

[djemz]

Aeroads coming back in stock if you check daily since last week. Ordered mine yesterday. A couple of other versions abailable also.

You have to be quick because after my order the date changed to 03/01. Good news is when they are abailable that you have it with in a week.

Verstuurd vanaf mijn AC2003 met Tapatalk

[wozzo]

Aeroads coming back in stock if you check daily since last week. Ordered mine yesterday. A couple of other versions abailable also.

You have to be quick because after my order the date changed to 03/01. Good news is when they are abailable that you have it with in a week.

Verstuurd vanaf mijn AC2003 met Tapatalk

Any change to the seatpost with new release?

[djemz]

No idea. Mine will be delivered next week..

Verstuurd vanaf mijn AC2003 met Tapatalk

[Cannoli]

Aeroads coming back in stock if you check daily since last week. Ordered mine yesterday. A couple of other versions abailable also.

You have to be quick because after my order the date changed to 03/01. Good news is when they are abailable that you have it with in a week.

Verstuurd vanaf mijn AC2003 met Tapatalk

Any change to the seatpost with new release?

Seat post changes?

[Cannoli]

Aeroads coming back in stock if you check daily since last week. Ordered mine yesterday. A couple of other versions abailable also.

You have to be quick because after my order the date changed to 03/01. Good news is when they are abailable that you have it with in a week.

Verstuurd vanaf mijn AC2003 met Tapatalk

I've been checking for a friend of mine and by refreshing the page a few times a day, he was able to score the new Ultimate CF SLX 8.0 Di2 with the Ultegra 12-speed. It was the only one in stock.

When I picked up my Aeroad and my wife's Aeroad back in December 2021, I had to do the same thing. I kept refreshing day after day and grabbed them when they were available. Seems Canyon USA only gets a few in at a time and they sell fast.

[cberg]

Dont watch to stir up new drama, but can comebody who has owned this bike for a while tell me how the paint looks on the inside of the seatstay in the circled location in attached picture?

[MattVega]

Dont watch to stir up new drama, but can comebody who has owned this bike for a while tell me how the paint looks on the inside of the seatstay in the circled location in attached picture?
billede_2022-12-05_143005963.png

Good question. is your paint a bit broken? Could well be; I find the seatstays to be quite flexy

[Cannoli]

Dont watch to stir up new drama, but can comebody who has owned this bike for a while tell me how the paint looks on the inside of the seatstay in the circled location in attached picture?

10,580 miles on my CFR and no issues whatsoever.

[cberg]

Dont watch to stir up new drama, but can comebody who has owned this bike for a while tell me how the paint looks on the inside of the seatstay in the circled location in attached picture?
billede_2022-12-05_143005963.png

Good question. is your paint a bit broken? Could well be; I find the seatstays to be quite flexy

Exactly, I noticed it about two months ago. It's slightly cracked on the inside, not visible unless you really inspect the bike closely. I messaged Canyon about it and they say that the frame itself is fine, and that the issue is that the carbon flexes more than the paint and gave me a €150 voucher for the website. I suppose that it could be an aftermath of that one cobbled race that I did.

It hasnt seemed to be getting worse, so I will just keep an eye on it and take it to a painter if it gets uglier.

[MattVega]

Dont watch to stir up new drama, but can comebody who has owned this bike for a while tell me how the paint looks on the inside of the seatstay in the circled location in attached picture?
billede_2022-12-05_143005963.png

Good question. is your paint a bit broken? Could well be; I find the seatstays to be quite flexy

Exactly, I noticed it about two months ago. It's slightly cracked on the inside, not visible unless you really inspect the bike closely. I messaged Canyon about it and they say that the frame itself is fine, and that the issue is that the carbon flexes more than the paint and gave me a €150 voucher for the website. I suppose that it could be an aftermath of that one cobbled race that I did.

It hasnt seemed to be getting worse, so I will just keep an eye on it and take it to a painter if it gets uglier.

I dont know enough of the structure of the seatstays, but I find it weird that it flexes THIS much...

My old BMC SLR02 has no flex here.

anyone here has more knowledge on this matter?

[djemz]

My ultimate flexes a lot on the seatstays also when hes on the wahoo kickr. My bmc didn't flex that much.

Verstuurd vanaf mijn AC2003 met Tapatalk

[MattVega]

My ultimate flexes a lot on the seatstays also when hes on the wahoo kickr. My bmc didn't flex that much.

Verstuurd vanaf mijn AC2003 met Tapatalk

It's actually reassuring that it's not just me who noticed this...

ANYWAY, it's not a structural issue so I dont really care

[djemz]

Santa came early this year.

Verstuurd vanaf mijn AC2003 met Tapatalk

[Cannoli]

Santa came early this year.

Verstuurd vanaf mijn AC2003 met Tapatalk

Nice!! Congratulations!! You're gonna love it