Sure! See this post which also has the sizes of cables: viewtopic.php?f=3&t=164007&start=75#p1636008
Does that give you enough info?
Moderator: robbosmans
@jamin: did you end up using the bolt/screw provided by specialized with the mount or did you need a longer one?jamin wrote: ↑Wed Apr 14, 2021 9:06 pmHere's my 400/100 fitted to my 56cm Tarmac SL6. Finally tracked down a proper spesh mount after not being happy with the printed one. Not sure if its me but the front feels more 'harsh' when compared to an S-Works stem and the stock alloy handlebar that it replaced. Would of thought it to be better being a one piece carbon setup. My just be in my head though.
Either way, looks really good and cleans the front end of the bike up no end, and a great deal lighter!
IMG_5450.jpgIMG_5451.jpgIMG_5449.jpg
The bolts that came with the mount were way too short, something like 6 or 8mm I think. I used an M4x12mm stainless steel bolt with a small amount of loctite since its the only bolt holding it on.xandidepressivax wrote: ↑Tue May 04, 2021 6:36 am@jamin: did you end up using the bolt/screw provided by specialized with the mount or did you need a longer one?
Great! Thanks so much for the information!jamin wrote: ↑Tue May 04, 2021 9:27 amThe bolts that came with the mount were way too short, something like 6 or 8mm I think. I used an M4x12mm stainless steel bolt with a small amount of loctite since its the only bolt holding it on.xandidepressivax wrote: ↑Tue May 04, 2021 6:36 am@jamin: did you end up using the bolt/screw provided by specialized with the mount or did you need a longer one?
That's an awesome looking bike!jamin wrote: ↑Wed Apr 14, 2021 9:06 pmHere's my 400/100 fitted to my 56cm Tarmac SL6. Finally tracked down a proper spesh mount after not being happy with the printed one. Not sure if its me but the front feels more 'harsh' when compared to an S-Works stem and the stock alloy handlebar that it replaced. Would of thought it to be better being a one piece carbon setup. My just be in my head though.
Either way, looks really good and cleans the front end of the bike up no end, and a great deal lighter!
IMG_5450.jpgIMG_5451.jpgIMG_5449.jpg
I have the exact same bike and tried an aethos last week, the £11750 dura ace s works. It didn't feel as fun as my SL6.jamin wrote: ↑Thu Apr 15, 2021 8:01 pmHehee, cheers! I've done a little bit to it over the winter, roval bars, sworks power saddle, direct mount hanger and Ultegra Di2 has cleaned the lines up nicely. However I really want an Aethos now, but just cant bare to part with this!
Hi, I had a cable routing question. Tried to PM ya but I couldn't so I emailed you.
I got one from Aliexpress, it was linked in this thread a few pages back.