Cocpit options for 2019 Scott Foil

[snaxez]

I got a good deal on 2019 Scott Foil Premium frameset, and now I have to decide on the cocpit options. I will go with Di2, so I would like to use the barend junction box and heatshrink the di2 cabel with rear brake hose.

1. SYNCROS RR1.0 Carbon Aero Bar/Stem combo. Does anyone have experience with that, I have seen some complaints about syncros combo, but it might have been on the version before that. The price is not cheap, about 450-500€. Weight is on the syncros site 395g for 420/110mm combo.
On the plus side it would look nicer on the Foil, than regular stem/bar combo.

2. Ritchey Superlogic EvoCurve Internal Routing Handlebar + Ritchey 1 1/4 Superlogic C260 Carbon stem. Claimed weight is 200+125=325g for 420/110mm combo. Would cost about 475€ from bike24.
With this combo I can reuse my C260 one piece CNC garmin mount, that replaces the C260 faceplate.

3. ? is there any other good options for 1 1/4 steerer?

I guess using the new SYNCROS IC SL combo would not be a great idea. Then I could not use the internal routing and it would look wierd?

[kkibbler]

Canyon has H11 and H36 which do not have internal barend routing.

[wltz]

With this combo I can reuse my C260 one piece CNC garmin mount, that replaces the C260 faceplate.

Is that a custom-made piece? I couldn't find anything on Google. Thank you!

[snaxez]

With this combo I can reuse my C260 one piece CNC garmin mount, that replaces the C260 faceplate.

Is that a custom-made piece? I couldn't find anything on Google. Thank you!

There was some who made them. www.edge-mount.bike but seems the webpage does not exist anymore. There is a thread of him here viewtopic.php?f=3&t=28122&start=630
mount looks like this

[wltz]

There was some who made them. www.edge-mount.bike but seems the webpage does not exist anymore. There is a thread of him here viewtopic.php?f=3&t=28122&start=630
mount looks like this

Aww thank you! Looks like I need to set up an eBay alert. If you don't go with Ritchey cockpit, I'd buy yours for however much you ask for it.

[dmbiscuit]

I got a good deal on 2019 Scott Foil Premium frameset, and now I have to decide on the cocpit options. I will go with Di2, so I would like to use the barend junction box and heatshrink the di2 cabel with rear brake hose.

1. SYNCROS RR1.0 Carbon Aero Bar/Stem combo. Does anyone have experience with that, I have seen some complaints about syncros combo, but it might have been on the version before that. The price is not cheap, about 450-500€. Weight is on the syncros site 395g for 420/110mm combo.
On the plus side it would look nicer on the Foil, than regular stem/bar combo.

2. Ritchey Superlogic EvoCurve Internal Routing Handlebar + Ritchey 1 1/4 Superlogic C260 Carbon stem. Claimed weight is 200+125=325g for 420/110mm combo. Would cost about 475€ from bike24.
With this combo I can reuse my C260 one piece CNC garmin mount, that replaces the C260 faceplate.

3. ? is there any other good options for 1 1/4 steerer?

I guess using the new SYNCROS IC SL combo would not be a great idea. Then I could not use the internal routing and it would look wierd?

Did you ever figure out a cockpit option? And if so what if any top cover / spacer adapters were needed?

[snaxez]

I got a good deal on 2019 Scott Foil Premium frameset, and now I have to decide on the cocpit options. I will go with Di2, so I would like to use the barend junction box and heatshrink the di2 cabel with rear brake hose.

1. SYNCROS RR1.0 Carbon Aero Bar/Stem combo. Does anyone have experience with that, I have seen some complaints about syncros combo, but it might have been on the version before that. The price is not cheap, about 450-500€. Weight is on the syncros site 395g for 420/110mm combo.
On the plus side it would look nicer on the Foil, than regular stem/bar combo.

2. Ritchey Superlogic EvoCurve Internal Routing Handlebar + Ritchey 1 1/4 Superlogic C260 Carbon stem. Claimed weight is 200+125=325g for 420/110mm combo. Would cost about 475€ from bike24.
With this combo I can reuse my C260 one piece CNC garmin mount, that replaces the C260 faceplate.

3. ? is there any other good options for 1 1/4 steerer?

I guess using the new SYNCROS IC SL combo would not be a great idea. Then I could not use the internal routing and it would look wierd?

Did you ever figure out a cockpit option? And if so what if any top cover / spacer adapters were needed?

I have it like this at the moment with Ritchey 1 1/4" C260 Superlogic stem. Would be nice to have a 3D printed cover some day.