Be Aware: Quarq dub cranks downgraded but the same price

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

None.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Hapsmo911
Posts: 275
Joined: Thu Apr 26, 2012 4:54 am

by Hapsmo911

I was going to sell my D1 arms, maybe I should hold off for a bit and see what my gravel build PM is going to be. Is the listed weight on the new Sram arms correct? 478 grams?? My 170 D1's are 331 with the adjuuster.

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Yep. They're around 130g heavier with the V2 arms, hence why I have two box fresh pairs of V1 172.5 in my possession...
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

gurk700
Posts: 956
Joined: Fri Jan 20, 2017 7:40 pm

by gurk700

PriorPhillip wrote:
Wed Apr 14, 2021 1:07 pm
What is the downside of using the red axs arms.. except for them being labeled as "red" vs "quarq"?
This is what I'm doing. Unfortunately no D1 Quarq's with old price to be found around anymore so I shelled out for red cranks.

PriorPhillip
Posts: 15
Joined: Fri Apr 10, 2020 7:54 am

by PriorPhillip

ryanw wrote:
Wed Apr 14, 2021 9:03 pm
Yep. They're around 130g heavier with the V2 arms, hence why I have two box fresh pairs of V1 172.5 in my possession...
Any chance a pair is for sale? :mrgreen:

Pinguin
Posts: 271
Joined: Fri Nov 02, 2018 9:28 pm

by Pinguin

Anybody here who has problems with the chainline on Axs D Zero spider and Dub D1 Crancarms?
It doesnt work on my Bb86 Frame with Di2 derailleur and Praxis rings
Looks like the 3mm Spacer is on the wrong side(original it is on driveside),so the crank should move 3-4 mm to the frame

Cant understand because its a new Axs Spider and new Crancarms

So there is also no chance to bring the derailleur more on the right side because the H screw is only to adjust the derailleur on big ring

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Di2 bike? Go into your lowest gear and use the left shifter to push out the front mech when in adjustment mode.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

Pinguin
Posts: 271
Joined: Fri Nov 02, 2018 9:28 pm

by Pinguin

ryanw wrote:
Tue Apr 20, 2021 7:18 am
Di2 bike? Go into your lowest gear and use the left shifter to push out the front mech when in adjustment mode.
Done
thats not enough

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Has to be installer error then.

I've fitted quite a few DUB Quarqs to BB86 bikes with fantastic results.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

Pinguin
Posts: 271
Joined: Fri Nov 02, 2018 9:28 pm

by Pinguin

ryanw wrote:
Tue Apr 20, 2021 8:44 am
Has to be installer error then.

I've fitted quite a few DUB Quarqs to BB86 bikes with fantastic results.
With Sram Dub Bb?

Ypuh
Posts: 673
Joined: Sun Dec 08, 2019 10:20 pm
Location: The Netherlands

by Ypuh

Are you sure you have the AXS Quarq spider? Not the older one?

I have some minor chain line issue as well with an older model Quarq DZero spider and Quarq D1 crank arms. Under normal use it works just fine, but when backpedalling and the chain being on the big ring and smallest 3 cogs, it'll run off on the front. In reality that's not a problem though, I don't cross chain and backpedal.
Cervelo S3 - 7.3kg
Time ADHX - 8.7kg

Pinguin
Posts: 271
Joined: Fri Nov 02, 2018 9:28 pm

by Pinguin

Ypuh wrote:
Wed Apr 21, 2021 8:34 am
Are you sure you have the AXS Quarq spider? Not the older one?

I have some minor chain line issue as well with an older model Quarq DZero spider and Quarq D1 crank arms. Under normal use it works just fine, but when backpedalling and the chain being on the big ring and smallest 3 cogs, it'll run off on the front. In reality that's not a problem though, I don't cross chain and backpedal.
On my Spider is little Axs written
But the Chainrings are more on the right side,and there is no way to bring the derailleur right if i want the derailleur parallel to the rings
Only way seems to work with thinner Spaceron drive side

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Thought I'd see how much my 172.5mm v1 DZero weighs with 50/34T Carbon-Ti rings, not bad at all!
Attachments
A7A18064-4C01-4D69-A9D2-D948955F742D.jpeg
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

Hexsense
Posts: 3270
Joined: Wed Dec 30, 2015 12:41 am
Location: USA

by Hexsense

ryanw wrote:
Wed Apr 21, 2021 9:39 pm
Thought I'd see how much my 172.5mm v1 DZero weighs with 50/34T Carbon-Ti rings, not bad at all!
Not just not bad. It's great.
My Absolute Black chainrings is relatively porky compare to that.

You like it's shifting?

User avatar
ryanw
in the industry
Posts: 2284
Joined: Sat Apr 16, 2016 6:52 pm
Location: London

by ryanw

Perfect for 2 years with R9170. Will definitely buy again for future bikes.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply