2021 BMC Teammachine

Discuss light weight issues concerning road bikes & parts.

Moderator: robbosmans

User avatar
slake21
Posts: 218
Joined: Tue Oct 18, 2016 9:59 am
Location: EU

by slake21

AMGRoadster wrote:
Tue Aug 25, 2020 11:58 pm
I want to call out the giant BMC logo. But I am very much leaning towards an SWorks SL7 and Specialzed is about the worst in splashing their name over every available surface.
It's actually not much larger than on the previus model. Just look at what Trek is doing, their bikes are basically huge logos on two wheels now... :unbelievable:

by Weenie


Swedius
Posts: 27
Joined: Wed Jul 22, 2020 6:25 pm

by Swedius

Got a slightly used Kickr v4 with Climb yesterday and it seems to work perfectly fine with a disc bike, thru-axles were no problem. Now awaiting a Kickr XDR body :-) Thanks!

CustomMetal
Posts: 384
Joined: Sat Dec 01, 2018 4:14 pm

by CustomMetal

Does anyone know if it is possible to buy the new BMC bottle cages after market?
Perdita- Burls Ti
Aurelia- Saffron Stainless/Carbon
Bertha - Trek Speedconcept
Verity - Sturdy Ti/Carbon Aero (incoming)
Serenity- Sturdy Ti (incoming)
Allegra - Sturdy Steel Lugged (incoming)

Jolene - Retired Aluminum

Hw44
Posts: 5
Joined: Mon Jul 23, 2018 10:12 pm

by Hw44

Hello everyone.
I just finished building SLR FOUR on Shimano 205 and noticed there is no option to fit ICS stem so have cables fully internally. I was thinking you can buy ICS stem and just replace it with original but the fork is different to SLR01. Do anyone know If I am wrong and missing something ? The fork is round so I think you cannot only replace stem but fork as well. 😔

Ettore
Posts: 122
Joined: Fri Nov 03, 2017 8:44 am

by Ettore

Hw44 wrote:
Sun Sep 06, 2020 10:48 am
Hello everyone.
I just finished building SLR FOUR on Shimano 205 and noticed there is no option to fit ICS stem so have cables fully internally. I was thinking you can buy ICS stem and just replace it with original but the fork is different to SLR01. Do anyone know If I am wrong and missing something ? The fork is round so I think you cannot only replace stem but fork as well. 😔
Hi, you are correct, the SLR01 and SLR are different bikes, with a different layup as well. The internal cable routing is only possible on BMC’s with a flat steerer, and every SLR01 has a flat steerer, and every SLR has a round steerer. Mounting the ICS stem is possible on both, but just because you have an ICS stem, does not mean that you can run cables through the bearings. If you’re set on running cables internally, I would sell the bike and buy and SLR01. But of course, an SLR01 starts at more than twice the price of the bike you have now..

spdntrxi
Posts: 4055
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

you can check if the forks are spec'd the same and possible get a SLR01 fork and combine with ICS
2019 BMC TM01 Road UCI config 7.36kg

Sharkelli
Posts: 5
Joined: Mon Aug 17, 2020 12:55 pm

by Sharkelli

Does anyone know if the Tacx Neo 2T is compatible with the new SLR01 2021? In their website they declare that is native for thru axel..


Inviato dal mio iPhone utilizzando Tapatalk

spdntrxi
Posts: 4055
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

Sharkelli wrote:
Tue Sep 08, 2020 7:03 pm
Does anyone know if the Tacx Neo 2T is compatible with the new SLR01 2021? In their website they declare that is native for thru axel..


Inviato dal mio iPhone utilizzando Tapatalk
the 2T is native.. the issue is on BMC's side for being creative.
2019 BMC TM01 Road UCI config 7.36kg

Sharkelli
Posts: 5
Joined: Mon Aug 17, 2020 12:55 pm

by Sharkelli

spdntrxi wrote: the 2T is native.. the issue is on BMC's side for being creative.
I did not understand if then I can mount my SLR01 2021 or notImage


Inviato dal mio iPhone utilizzando Tapatalk

Swedius
Posts: 27
Joined: Wed Jul 22, 2020 6:25 pm

by Swedius

Sharkelli wrote:
Tue Sep 08, 2020 7:03 pm
Does anyone know if the Tacx Neo 2T is compatible with the new SLR01 2021? In their website they declare that is native for thru axel..


Inviato dal mio iPhone utilizzando Tapatalk
Found this and it looks like thru-axle with the 2T shouldn't be a problem: https://www.youtube.com/watch?v=VWxvM89L6lo

However earlier in this thread I was recommended to go with Wahoo instead as Tacx has rubbing issues with disc brake bikes. I bought a Wahoo Kickr and it works very well, no problems at all.

Don't forget the XDR body if you use Sram AXS!
Last edited by Swedius on Fri Sep 11, 2020 9:29 am, edited 1 time in total.

Swedius
Posts: 27
Joined: Wed Jul 22, 2020 6:25 pm

by Swedius

So the BMC TeamMachine SLR One comes with the wheelset called CRD-351 and the TeamMachine SLR01 Four comes with CRD-351 SL.

As I own a SLR one I've now stripped the CRD-351 wheelset down and it weights 1610 grams (with rim tape).

I switched to a 300 grams lighter 38mm wheelset and you can absolutely tell the difference.

Pukutis
Posts: 61
Joined: Fri Jan 05, 2018 9:00 pm

by Pukutis

Swedius wrote:So the BMC TeamMachine SLR One comes with the wheelset called CRD-351 and the TeamMachine SLR01 Four comes with CRD-351 SL.

As I own a SLR one I've now stripped the CRD-351 wheelset down and it weights 1610 grams (with rim tape).

I switched to a 300 grams lighter 38mm wheelset and you can absolutely tell the difference.
I have the same wheels, and bmc slr01 2021 and i was looking to buy the Enve 3.4 with dtswiss 240 hubs....


Sent from my iPhone using Tapatalk

Swedius
Posts: 27
Joined: Wed Jul 22, 2020 6:25 pm

by Swedius

Pukutis wrote:
Fri Sep 11, 2020 9:28 am
Swedius wrote:So the BMC TeamMachine SLR One comes with the wheelset called CRD-351 and the TeamMachine SLR01 Four comes with CRD-351 SL.

As I own a SLR one I've now stripped the CRD-351 wheelset down and it weights 1610 grams (with rim tape).

I switched to a 300 grams lighter 38mm wheelset and you can absolutely tell the difference.
I have the same wheels, and bmc slr01 2021 and i was looking to buy the Enve 3.4 with dtswiss 240 hubs....


Sent from my iPhone using Tapatalk
Those will be nice! Should be ~ 1409 grams for the set. I can't put the money into such wheels so went with Aliexpress. Manufacturing was like 3.5 weeks from the order date and delivery approx 10 days.

Swedius
Posts: 27
Joined: Wed Jul 22, 2020 6:25 pm

by Swedius

Pukutis wrote:
Fri Sep 11, 2020 9:28 am
As I own a SLR one I've now stripped the CRD-351 wheelset down and it weights 1610 grams (with rim tape).

I have the same wheels, and bmc slr01 2021
If you own a BMC SLR01 2021 you don't have the same wheels. They're only shipped with the SLR One model. If you own the SLR01 Four you get the SL version of the wheels :-)

by Weenie


Pukutis
Posts: 61
Joined: Fri Jan 05, 2018 9:00 pm

by Pukutis

Swedius wrote:
Pukutis wrote:
Fri Sep 11, 2020 9:28 am
As I own a SLR one I've now stripped the CRD-351 wheelset down and it weights 1610 grams (with rim tape).

I have the same wheels, and bmc slr01 2021
If you own a BMC SLR01 2021 you don't have the same wheels. They're only shipped with the SLR One model. If you own the SLR01 Four you get the SL version of the wheels :-)
I have the bmc slr01 - four and i have the cdr- 351 sl, you are right. The weight was around 1620 gr.


Sent from my iPhone using Tapatalk

Post Reply