EEwings All Road + Sigeyi 110mm 3-5 spider

Discuss light weight issues concerning road bikes & parts.
elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

Hello

Does anyone use the EEWINGS with a powermeter Spider from Sigeyi.?

Since the 3 bolt pattern is reverse I think is possible to use this spider.

Any thoughts on the matter.

Let me know please.

by Weenie


elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

Anyone on this subject...??? :noidea:

alanyu
Posts: 568
Joined: Thu Jun 06, 2019 1:10 pm

by alanyu

It looks possible to use AXO on eewings, but one chainring bolt is then under the crank. Is there enough clearance? Another question is would the chainline be OK then?

And why do you want that combo? On the function side, Favero pedals are better; on the WW side, skypivot + AXO is lighter and cheaper.

elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

Thanks for your answer.


Already have the EEWINGS, and really like it.

Don't want to increase the Qfactor. Using pedals.

mattsurf
Posts: 69
Joined: Sat Feb 24, 2018 8:26 pm

by mattsurf

There is no increase in Q Factor with Favero Assioma

elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

replacing the Pedals that i use, the is an increase of 2mm per side

Nefarious86
Moderator
Posts: 3566
Joined: Sun May 25, 2014 4:57 am
Contact:

by Nefarious86

Is there not 2mm of room on your cleat adjustment?

Sent from my SM-N976B using Tapatalk

Using Tapatalk

icantaffordcycling
Posts: 1137
Joined: Wed Jan 09, 2019 5:03 am
Location: Bay Area, CA

by icantaffordcycling

elfuinha wrote:
Thu Jan 23, 2020 11:01 am
replacing the Pedals that i use, the is an increase of 2mm per side
Just use 2mm of pedal washers?

elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

I don't want to increase the Qfactor.

EEwings are 160mm quite large.
My Pedals Keywin have -3mm spindles = 52mm

By using the favero i will see an increase of 2mm per side.

hope i explain it better.

alanyu
Posts: 568
Joined: Thu Jun 06, 2019 1:10 pm

by alanyu

I feel you.

160mm Qf is large compare to normal value 145~150mm. I also prefer smaller Qf.

Ruben58
Posts: 20
Joined: Fri Apr 14, 2017 7:08 pm

by Ruben58

I once inquired with Power2Max wether their PM would work and I was told it wouldn't because the bolt pattern is upside down and there would be clearance issues. Theirs however has a small bump on the spider which normally would be opposite the crank arm, but not with the EE wings because of the rotated interface.
Last edited by Ruben58 on Thu Jan 23, 2020 12:05 pm, edited 1 time in total.

elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

alanyu wrote:
Thu Jan 23, 2020 11:58 am
I feel you.

160mm Qf is large compare to normal value 145~150mm. I also prefer smaller Qf.
Right now it's 154mm with the smaller Spindles, it's ok, could go to 148mm, with Keywin smaller spindles, but i think the Bont's will rub the crank arms.

elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

Ruben58 wrote:
Thu Jan 23, 2020 12:01 pm
I once inquired with Power2Max wether their PM would work and I was told it wouldn't because the bolt pattern is upside down and there would be clearance issues.
Yes i also look in to this...

But i think Sigeyi will work because there is a redution in height at the end of this PM, and the charging port will be used in the same way...
also here in Portugal is impossivel to check this... also this PM is only available by ALIEXPRESS.

elfuinha
Posts: 843
Joined: Sun Aug 08, 2010 10:18 pm

by elfuinha

hello

Anyone as tried this????, with the EEWings Allroad

https://www.sigeyishop.com/products/sig ... 7231668277

Jhomewood
Posts: 257
Joined: Fri Feb 22, 2013 8:30 am

by Jhomewood

Maybe look for an old three bolt quarq spider

by Weenie


Post Reply