Hi guys,
I own a 2014 shiv tt with a specialized osbb. I was wondering what spacers would be required to run an FSA powerbox crankset with a bb386evo spindle, I am assuming I can as the both have a 30mm spindle and the FSA spindle is longer than the one on the s-works cranks currently installed.
Thanks
Fitting BB386Evo cranks into specialized osbb frame
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
https://www.bike24.de/p130105.html
But bear in mind that the spacers cause load on the bearings not only from the top but also sideways. I tried this once and the bearings were finished after 3,000kms. The best combination is always a matching one...
But bear in mind that the spacers cause load on the bearings not only from the top but also sideways. I tried this once and the bearings were finished after 3,000kms. The best combination is always a matching one...
Contact these guys and they will get you sorted.
https://www.bbinfinite.com/
https://www.bbinfinite.com/
Ride fast Take chances