2020 Specialized Tarmac SL7

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Raymonndo
Posts: 83
Joined: Fri May 22, 2020 3:35 pm

by Raymonndo

poppiholla wrote:
Tue Aug 03, 2021 3:48 pm
I ordered this one. :-)
Image
Very nice this one! Is this also bare carbon with satin lacquer?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Aerohead23
Posts: 354
Joined: Wed Jan 20, 2021 10:35 am

by Aerohead23

Anyone know bike shops with the tarmac in stock and shipping EU wide?

niklasp
Posts: 158
Joined: Thu Jul 14, 2016 5:36 pm

by niklasp

Aerohead23 wrote:
Tue Aug 03, 2021 8:38 pm
Anyone know bike shops with the tarmac in stock and shipping EU wide?
Cicli drigani? They usually have those gems...

"Buy fast!" As any specialized bike 😳😁🤷

poppiholla
Posts: 597
Joined: Wed Aug 03, 2011 1:18 pm

by poppiholla

Very nice this one! Is this also bare carbon with satin lacquer?
I think so.

Satin carbon / spectraflair / gloss brushed chrome
Specialized Tarmac S-works SL7 (Satin carbon spectraflair tint)
Specialized Tarmac S-works SL6 (Green Cameleon)
Specialized Tarmac Pro SL6 Disc (Blue/Teal Sram Force AXS)
Specialized Epic Elite 29
Greetings from the Netherlands

Raymonndo
Posts: 83
Joined: Fri May 22, 2020 3:35 pm

by Raymonndo

poppiholla wrote:
Tue Aug 03, 2021 9:28 pm
Very nice this one! Is this also bare carbon with satin lacquer?
I think so.

Satin carbon / spectraflair / gloss brushed chrome
I think this is up there for me. Either this one or the Jet Fuel.

I spoke to my LBS and we have no details on them yet so I will wait patiently!

ome rodriguez
Posts: 1371
Joined: Fri Feb 24, 2006 9:16 am

by ome rodriguez

Swannie wrote:
Tue Aug 03, 2021 5:01 pm
fritzbox wrote:
Tue Aug 03, 2021 3:30 pm
I ordered Satin carbon jet fuel Image

Gesendet von meinem SM-T720 mit Tapatalk
me too :thumbup:
Any photos of the SL7 Satin carbon jet fuel?

Ride4Life
Posts: 373
Joined: Tue Apr 30, 2019 6:46 am

by Ride4Life

ome rodriguez wrote:
Wed Aug 04, 2021 1:25 am
Swannie wrote:
Tue Aug 03, 2021 5:01 pm
fritzbox wrote:
Tue Aug 03, 2021 3:30 pm
I ordered Satin carbon jet fuel Image

Gesendet von meinem SM-T720 mit Tapatalk
me too :thumbup:
Any photos of the SL7 Satin carbon jet fuel?
I haven't seen any yet, however there is a version of the Aethos with the same exact color scheme.

Swannie
Posts: 405
Joined: Thu Jan 11, 2007 3:48 pm
Location: Belgium
Contact:

by Swannie

only the pic on page 309.

hatone
Posts: 31
Joined: Thu Dec 30, 2010 1:33 pm

by hatone

Does anyone know if the bare carbon with satin lacquer frame is matte with a laquear finish?

Only ask 'cos matte frames are suspectiable to finger prints, sweat marks etc.. so prefer matte with a protective or semi-gloss finish.

BadBoyR
Posts: 260
Joined: Thu Dec 31, 2020 11:41 pm

by BadBoyR

Can someone please advise if the standard 100mm S works stem is -6 degree?


Sent from my iPhone using Tapatalk

mgrl
Posts: 340
Joined: Wed Nov 25, 2020 12:49 am

by mgrl

It is

random101
Posts: 105
Joined: Sat Jul 19, 2014 10:15 pm

by random101

Hey all,

I can't beleive it! I pulled the pin and bought a 54 Sworks sl7! (I was test riding the two sizes being 180) right inbetween the two, but have always ridden 54. 56 felt like it was straining my neck a bit much looking up... so kept the 54!

Anyhow.

I'll be building it up shortly.

I'm pretty confident, but I want to ask a few questions for tips and tricks on the build. I'll be building it up with Sram AXS Red. Farsport F1 handlebars.

So questions;

1. Is there a specalized bike manual for the build (silly question but hey would be good, although straight foward).

2. SRAM Dub bottom bracket (I need to find the chart, but just seeing if the spacers are needed).

3. Running cables through, should be straight foward... putting the casing through so it doesn't rattle ect. Tapping the lines to the forks seems to be a good tip I saw in a build video.

4. Anything to be mindful of? I'll be cutting the stem down to maximum spacers then I'll cut it down again if need be in the future.

I'm super excitied - I want to make sure I don't miss anything when I do the build.

kofsw4
Posts: 157
Joined: Wed Sep 20, 2017 10:28 pm
Location: London, UK

by kofsw4

Tarmac manual here

https://www.google.com/url?sa=t&source= ... weA56-Kuda

It's got loads of detail and seems very straight forward but I haven't built mine up yet either so no further tips from me.

random101
Posts: 105
Joined: Sat Jul 19, 2014 10:15 pm

by random101

Thanks :)

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



nateners
Posts: 52
Joined: Tue Apr 28, 2020 1:55 pm

by nateners

Any news on what the Expert and Pro level (Ultegra) bikes will look like?

Post Reply