How is the color in real? Still waiting for my 58 to arrive …
Thanks!
Moderator: robbosmans
How is the color in real? Still waiting for my 58 to arrive …
Can you not use the one with the Specialized mount?dmccombs wrote: ↑Fri Jan 21, 2022 2:46 amFor those that oredered the Shapeways 1030 Garmin Mount that attaches to the from of the Tarmac stem...
Can you tell me where you got the M4 Tee nut, on the backside of the stem plate, that holds the screw,? It looks like this M4 Tee nut must be thin, and possibly curved.
I don't have the specialized garmin mount. One didnt come with my SL7 Expert.Sanders2177 wrote: ↑Fri Jan 21, 2022 9:02 amCan you not use the one with the Specialized mount?dmccombs wrote: ↑Fri Jan 21, 2022 2:46 amFor those that oredered the Shapeways 1030 Garmin Mount that attaches to the from of the Tarmac stem...
Can you tell me where you got the M4 Tee nut, on the backside of the stem plate, that holds the screw,? It looks like this M4 Tee nut must be thin, and possibly curved.
When you bought that Tee Nut, did you have to dremel the flat base, or the cylinder that retains the screw? And, did you need a vice to hold the nut while you used the dremel, or will a pair of pliers suffice. Sorry for the dumb questions, but I'm not too handy...LanceLegstrong wrote: ↑Thu Oct 15, 2020 2:49 pmWhat I did was get an M4 nut (https://www.amazon.com/gp/aw/d/B07H57XW ... asin_title) and use a dremel to square it off to fit. Then bought the Shapeways mount (https://www.shapeways.com/product/HYAZA ... =165417997). I didn't weigh it unfortunately before mounting but it looks and feels solid so far. I'll post a picture when I get home.
I have the Sigeyi one on my Canyon and it legitimatley shifts faster and more precisely. One of the best "low budget" bike purchases I've ever made.Sanders2177 wrote: ↑Tue Jan 18, 2022 5:45 pmHey All
Just purchased a couple of direct mount hangers for Shimano rear derailleur the usual suspect Sigeyi and a brand called Redshift from AliExpress.
Negligible weight difference but does not show on my scales both 12g. Sigey says 12.1g and Redshift 12.5G.
very subtle diffrences in design when compared side by side up close and same material 7075 T6
Sigeyi £34.99 and Redshift £1.47!
Received today after ordering on 30 Dec.
Anyone else purchased same hanger? All good quality wise no snapping or cracking?
Oh ok hmmm well the magcad mount I got came with fixing off eBaydmccombs wrote: ↑Fri Jan 21, 2022 3:36 pmI don't have the specialized garmin mount. One didnt come with my SL7 Expert.Sanders2177 wrote: ↑Fri Jan 21, 2022 9:02 amCan you not use the one with the Specialized mount?dmccombs wrote: ↑Fri Jan 21, 2022 2:46 amFor those that oredered the Shapeways 1030 Garmin Mount that attaches to the from of the Tarmac stem...
Can you tell me where you got the M4 Tee nut, on the backside of the stem plate, that holds the screw,? It looks like this M4 Tee nut must be thin, and possibly curved.
https://www.ebay.co.uk/itm/293969546548 ... SwOEZgDbaOdmccombs wrote: ↑Fri Jan 21, 2022 3:36 pmI don't have the specialized garmin mount. One didnt come with my SL7 Expert.Sanders2177 wrote: ↑Fri Jan 21, 2022 9:02 amCan you not use the one with the Specialized mount?dmccombs wrote: ↑Fri Jan 21, 2022 2:46 amFor those that oredered the Shapeways 1030 Garmin Mount that attaches to the from of the Tarmac stem...
Can you tell me where you got the M4 Tee nut, on the backside of the stem plate, that holds the screw,? It looks like this M4 Tee nut must be thin, and possibly curved.
Thank you for the info. I see this is in the UK. I am in the US. This would end up being pretty expensive since I already have the stem itself on order.Sanders2177 wrote: ↑Fri Jan 21, 2022 8:53 pmhttps://www.ebay.co.uk/itm/293969546548 ... SwOEZgDbaOdmccombs wrote: ↑Fri Jan 21, 2022 3:36 pmI don't have the specialized garmin mount. One didnt come with my SL7 Expert.Sanders2177 wrote: ↑Fri Jan 21, 2022 9:02 amCan you not use the one with the Specialized mount?dmccombs wrote: ↑Fri Jan 21, 2022 2:46 amFor those that oredered the Shapeways 1030 Garmin Mount that attaches to the from of the Tarmac stem...
Can you tell me where you got the M4 Tee nut, on the backside of the stem plate, that holds the screw,? It looks like this M4 Tee nut must be thin, and possibly curved.
The flat base. So it goes from being a circle to more of a rectangle. And below you will see my masterpiece of a drawing. The bottom sketch is a view from the bottom. A set of pliers were good enough for me, just went slow. I don't have a vice but I'm sure it would have helped.dmccombs wrote: ↑Fri Jan 21, 2022 5:16 pmWhen you bought that Tee Nut, did you have to dremel the flat base, or the cylinder that retains the screw? And, did you need a vice to hold the nut while you used the dremel, or will a pair of pliers suffice. Sorry for the dumb questions, but I'm not too handy...LanceLegstrong wrote: ↑Thu Oct 15, 2020 2:49 pmWhat I did was get an M4 nut (https://www.amazon.com/gp/aw/d/B07H57XW ... asin_title) and use a dremel to square it off to fit. Then bought the Shapeways mount (https://www.shapeways.com/product/HYAZA ... =165417997). I didn't weigh it unfortunately before mounting but it looks and feels solid so far. I'll post a picture when I get home.
Great, Thank You. Your picture were worth a 1000 words. LOLLanceLegstrong wrote: ↑Sat Jan 22, 2022 1:04 amThe flat base. So it goes from being a circle to more of a rectangle. And below you will see my masterpiece of a drawing. The bottom sketch is a view from the bottom. A set of pliers were good enough for me, just went slow. I don't have a vice but I'm sure it would have helped.dmccombs wrote: ↑Fri Jan 21, 2022 5:16 pmWhen you bought that Tee Nut, did you have to dremel the flat base, or the cylinder that retains the screw? And, did you need a vice to hold the nut while you used the dremel, or will a pair of pliers suffice. Sorry for the dumb questions, but I'm not too handy...LanceLegstrong wrote: ↑Thu Oct 15, 2020 2:49 pmWhat I did was get an M4 nut (https://www.amazon.com/gp/aw/d/B07H57XW ... asin_title) and use a dremel to square it off to fit. Then bought the Shapeways mount (https://www.shapeways.com/product/HYAZA ... =165417997). I didn't weigh it unfortunately before mounting but it looks and feels solid so far. I'll post a picture when I get home.