Aero racing geometry disc frame with bigger clearences?

Discuss light weight issues concerning road bikes & parts.
Applesoap
Posts: 18
Joined: Sun Apr 30, 2017 2:54 pm

by Applesoap

I have a look 795 and it clears 30mm with room to spare.

musiclover
Posts: 44
Joined: Mon Sep 30, 2019 11:58 pm

by musiclover

TobinHatesYou wrote:
Sat Oct 19, 2019 7:48 pm
You will likely be limited by the fork crown / tire height rather than width. ISO compliance dictates minimum clearance of 6mm, but I would be comfortable going down to 4mm or so. 2mm would be no bueno, especially with component flex taken into account.
OK, but for that rim width is not important, only tyre size?..

by Weenie


musiclover
Posts: 44
Joined: Mon Sep 30, 2019 11:58 pm

by musiclover

Ravnsnaes wrote:
Sat Oct 19, 2019 8:06 pm
Rondo HVRT CF?

http://rondo.cc/hvrt-cf,185&colorSet=1,pl
Thanks, as mentioned a couple of posts above, not sold in Australia.

audiojan
Posts: 830
Joined: Fri Jan 27, 2006 1:38 pm
Location: New Hampshire

by audiojan

Yes, Ventum NS1. Plenty of clearance even with Enve 4.5AR and 28mm tubeless.
"Suddenly the thought struck me; my floor is someone elses ceiling" - Nils Ferlin

emotive
Posts: 196
Joined: Tue Nov 01, 2016 10:40 am
Location: Melbourne, Australia

by emotive

musiclover wrote:
Sun Oct 20, 2019 1:18 am
TobinHatesYou wrote:
Sat Oct 19, 2019 7:48 pm
You will likely be limited by the fork crown / tire height rather than width. ISO compliance dictates minimum clearance of 6mm, but I would be comfortable going down to 4mm or so. 2mm would be no bueno, especially with component flex taken into account.
OK, but for that rim width is not important, only tyre size?..
If you have clearance for a 30mm tyre, you have clearance for a 30mm wide rim, and more. Look at the shape of the fork, and the chainstay. The fork and chainstays are most narrow where the tyre sits, and wider where the wheel sits.

musiclover
Posts: 44
Joined: Mon Sep 30, 2019 11:58 pm

by musiclover

emotive wrote:
Mon Oct 21, 2019 4:06 am
musiclover wrote:
Sun Oct 20, 2019 1:18 am
TobinHatesYou wrote:
Sat Oct 19, 2019 7:48 pm
You will likely be limited by the fork crown / tire height rather than width. ISO compliance dictates minimum clearance of 6mm, but I would be comfortable going down to 4mm or so. 2mm would be no bueno, especially with component flex taken into account.
OK, but for that rim width is not important, only tyre size?..
If you have clearance for a 30mm tyre, you have clearance for a 30mm wide rim, and more. Look at the shape of the fork, and the chainstay. The fork and chainstays are most narrow where the tyre sits, and wider where the wheel sits.
Great. then 32 should fit, thanks.

emotive
Posts: 196
Joined: Tue Nov 01, 2016 10:40 am
Location: Melbourne, Australia

by emotive

Just came across the Parlee RZ7. Aero, 32mm clearance, and available in AU. Haven’t checked geo but looks like it could work for you.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post