Page 1 of 1

Help: stem angle of Look 795 Blade ADS stem?

Posted: Mon Oct 14, 2019 8:12 am
by Arimmki
I know there are a few owners of the Look 795 Blade. Do any of you know happen to know the angle of your ADS stem? I just can't find that anywhere online...or, well, I've found one place that says it's -6, another says -10 degrees.

Anyway, if somebody has the info, please share :)

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Sat Jan 04, 2020 4:55 am
by Team Murray
The stem is 10d. Post a pic of your build.


Sent from my iPhone using Tapatalk

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Sat Jan 04, 2020 4:55 am
by Weenie

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Wed Jan 08, 2020 4:13 pm
by inspclouseau
Just picked mine up and two rides in. Fits and rides so differently than my Izalco.

It's comfy but man is it heavy. Waiting for my hubs to be serviced to get my old wheels on there but the bike def needs a diet.

As far as the stem goes - does yours rattle? Can't tell if it's the cables or stem cover on top of the spacers.

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Wed Jan 08, 2020 4:18 pm
by Team Murray
I found it to be a kg heavier than my rim brake C64 with a similar build. Meanwhile, the ride is very smooth.

I did not have any issues with rattling. I used the foam tubes to encase the hydraulic brake cables as they are routed through the stem.
Image


Sent from my iPhone using Tapatalk

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Mon Jan 13, 2020 8:45 am
by ricarello
Team Murray wrote:
Wed Jan 08, 2020 4:18 pm
I found it to be a kg heavier than my rim brake C64 with a similar build. Meanwhile, the ride is very smooth.

I did not have any issues with rattling. I used the foam tubes to encase the hydraulic brake cables as they are routed through the stem.
Hi, are you comparing Rim bike to Rim bike or Rim to disk?

I am quite concerned if with the weight.... Colnago aren't the reference in lightness so....

Would you know the frame weight in regular break - I found 950+300 on the net
that would be very reasonable

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Mon Jan 13, 2020 8:55 am
by Team Murray
C64 Rim brake with 11sp ETap and Shamal Mille: 16.5lbs

Look 795 Blade RS disc brake with 11sp ETap HRD and Dura Ace C40 wheels: 18.5lbs

Things that are the same or very close in weight:
HB, saddle, cages, cranks, BB, deraileurs, shifters, tires, cassette, chain

Components heavier on Look:
Wheels are about 100g heavier on the Look due to the discs
Seatpost has about 3x more material
Stem is a significant forged piece of work
Frame tubes appear larger cross section
Frame design is less sloping




Sent from my iPhone using Tapatalk

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Mon Jan 13, 2020 9:12 am
by ricarello
That's pretty intense...

8.3 kg for top of line.....

It's defenetly the seat post / stem, that are the weaknesses of this bike.

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Tue Jan 14, 2020 1:50 am
by bm0p700f
Look know that a fast bike does not ha e to be light.

I was fairly quick tonight into a 30 mph headwind with horizontal rain on a 15 to 16kg bike on a route with 100m of climbing every 10km. Well 15.4 mph average but that was an effort.

8.3kg is fine for this bike. My 795 the older one is around that weight and is so quick it flatters me.

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Tue Jan 14, 2020 1:50 am
by Weenie

Re: Help: stem angle of Look 795 Blade ADS stem?

Posted: Wed Feb 05, 2020 6:31 am
by ricarello
You just need 1 climb to make a bike too heavy.

795 blade RS + Ultegra Di2 + Corima 47 Tubs = 7.7kg (inc all pedals, cage, computer mount....).