Quarq Dzero BB30 into BB386

Discuss light weight issues concerning road bikes & parts.
Post Reply
teebs
Posts: 9
Joined: Sun Jan 22, 2017 10:04 pm

by teebs

Hi All,

I currently have the above Quarq Dzero Aluminium unit that is fitted into a 2017 S Works Tarmac. I was hoping to move it across into my new Orbea Orca OMX that has a BB386. The online advice is conflicting and I've even checked the original box and it had the adapters for BB386 installation.

Can anyone confirm for me?

Many thanks.

User avatar
cerro
Posts: 1563
Joined: Fri May 12, 2006 2:11 pm
Location: Stockholm, Sweden
Contact:

by cerro

Guessing you got a thick plastic spacer on the drive side, a small one next to the tensioner on the left side? If so just to take them away, change to 2+3mm spacers and a wavy washer. Made for both.
/jonas l
http://cerrol.wordpress.com (my cyclingblog)

by Weenie


teebs
Posts: 9
Joined: Sun Jan 22, 2017 10:04 pm

by teebs

I will need to check but that sounds about right, thanks for your help.

jmh
Posts: 359
Joined: Sat Nov 27, 2004 1:57 am

by jmh

teebs wrote:
Wed Sep 25, 2019 4:55 pm
Hi All,

I currently have the above Quarq Dzero Aluminium unit that is fitted into a 2017 S Works Tarmac. I was hoping to move it across into my new Orbea Orca OMX that has a BB386. The online advice is conflicting and I've even checked the original box and it had the adapters for BB386 installation.

Can anyone confirm for me?

Many thanks.
SRAM sells a kits for their Quarq BB30 kits to be used with BB386. It is some thin spacers and a wave washer.

https://www.amazon.com/SRAM-BB30-Spindl ... B074BBBCRQ

teebs
Posts: 9
Joined: Sun Jan 22, 2017 10:04 pm

by teebs

Thanks, I've checked the original box and the washer kit is in there!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post