Garmin mounts for Uno Kalloy stems?
Moderator: robbosmans
-
- Posts: 71
- Joined: Tue Aug 05, 2008 7:18 pm
I use the Wahoo version of this: https://www.racewaredirect.co/shop/carb ... ate-mount/
You want to get the 24mm version for an Uno. It doesn't come with a GoPro mount, but as they 3D print the mounts, you may be able to get them to do a custom one.
You want to get the 24mm version for an Uno. It doesn't come with a GoPro mount, but as they 3D print the mounts, you may be able to get them to do a custom one.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
whyamihere: thanks! i like the k-edge how it drops down from the handlebar so the garmin will be flush. besides the raceware.. any other carbon or plastic type that would fit the lightweight standards? i'm in the US, so ordering from raceware might not be cost effective...
With current dolar-pound exchange rate?
Or you can wait till Halloween, it should be even better
Or you can wait till Halloween, it should be even better
What’s the weight and is it a strong mount; meaning the garmin doesn’t bounce up and down or around when riding?whyamihere wrote:I use the Wahoo version of this: https://www.racewaredirect.co/shop/carb ... ate-mount/
You want to get the 24mm version for an Uno. It doesn't come with a GoPro mount, but as they 3D print the mounts, you may be able to get them to do a custom one.
Also I took some measurements and 24mm seems a bit tight. I see it around 24.7mm. Did your fit snug on the uno stem?
Sent from my iPhone using Tapatalk
I bought this when I was in China.
What you need is: 3K carbon fiber board, resin, garmin mount (and gopro mount).
Cut the carbon board into several pieces with a designed shape;
Drill holes for screws and connection;
Glue them...
It's not difficult to DIY. What you need is: 3K carbon fiber board, resin, garmin mount (and gopro mount).
Cut the carbon board into several pieces with a designed shape;
Drill holes for screws and connection;
Glue them...
Yup I saw your post on that! Love it. I’ll give that a try with some steel coat hangersMarin wrote:Made my own mount -> viewtopic.php?f=3&t=158165
Alanyu: yup I saw those on AliExpress too.. but glad I saw Marins diy
Sent from my iPhone using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
F3 FormMount: https://f3cycling.com/formmount
Fetha: https://www.fetha.com.au/product-page/n ... nium-mount
Fetha: https://www.fetha.com.au/product-page/n ... nium-mount