Carbon frame and requisite parts...

Discuss light weight issues concerning road bikes & parts.
Post Reply
Berzin1
Posts: 127
Joined: Wed Jul 20, 2016 9:35 pm

by Berzin1

Now that I have my ti frame all built up it's time to think about a dedicated climbing bike. Carbon will be the frame material, and I will make the purchase from a custom frame builder. Right now I'm looking at Sarto, Calfee Design, Landshark, Crumpton, Parlee, and Appleman. Price is a consideration, but so is what is offered in the initial price.

So here are a few questions-

1) Best BB option-T47?

2) Regular Dura Ace cranks and brakes, or can I go with Clavicula without losing much in terms of performance?

3) What about a Cannondale crankset? Can they be purchased separately? I went to their website and they are not offered separately.

4) Does Enve sell rims separately or only complete wheels?

5) Seatpost, stem and handlebars-thinking Darimo for all three. Reason-customization. I can go with a 125 stem mated with an extra stiff handlebar. Also thinking having the stem/handlebar combo wrapped in carbon as a one peice like Calfee does. Any pros/cons to this potential setup?

6) Feel free to mention any other frambuilder you feel I should add to the list.

by Weenie


alanyu
Posts: 79
Joined: Thu Jun 06, 2019 1:10 pm

by alanyu

1) T47 is of course nice if 50ish more grams is not a problem. Want ligher? BB386 is good. I will always stay away from BB30.

2) I would like to recommend Easton EC90SL crankset (It's 386 spindle). Both lighter and stiffer than DA crankset. They also provide a power meter spindle.

3) Check on ebay for 99% new or a used one.

4) Yes, they sell rims separately, but you will pay too much for the brand's name. Enve's rims/wheels are not worth the price.

5) No experience with those.

joeyb1000
Posts: 197
Joined: Thu Mar 03, 2016 8:37 pm

by joeyb1000

+1 on Sarto.
I would add Holland to the list.

hambini
Posts: 490
Joined: Tue Nov 15, 2016 8:13 am
Location: Cologne, Germany

by hambini

1. Any BB is fine provided it meets the specifications. However there are a couple to avoid BBright (Cervelo spec is terrible), BB90 (Trek Spec is terrible).

2. I would go with DA cranks

3. Cannondale engineering is more slack than a wizards cuff.
Hambini Aeronautical Engineer, Polluting YouTube since 2016 - views expressed are my own...
Add me ON TWITTER!
Aerodynamic Masterclass in bicycle wheels
I fixed the bottom bracket from hell

dmp
Posts: 383
Joined: Fri May 08, 2009 8:31 pm
Location: Seattle

by dmp

also you may want to add Argonaut to the list (not that I am trying to make your decision more complicated, but they are great frames and can be had as full custom - layup as well as geometry)

by Weenie


Berzin1
Posts: 127
Joined: Wed Jul 20, 2016 9:35 pm

by Berzin1

@dmp-Right now I'm in the preliminary stages of doing research, so any company that I may have missed in my initial list is more than welcome.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post