Back by popular demand, the general all-things Road forum!
Moderator: robbosmans
-
jorisee01
- Posts: 386
- Joined: Mon May 04, 2015 8:22 pm
by jorisee01 on Wed Sep 04, 2019 10:02 pm
none wrote:TimmS wrote: ↑Tue Sep 03, 2019 8:19 pm
Look ergostem maybe?
I've got one of those, let me know if you need it.
Thanks. I think I've got what I need right now. Ig needed I'll let you know! Much appreciated!
Verstuurd vanaf mijn SM-G960F met Tapatalk
-
jorisee01
- Posts: 386
- Joined: Mon May 04, 2015 8:22 pm
by jorisee01 on Wed Sep 11, 2019 6:57 pm
Internal wires are done. I use speaker wires soldered to di2 connectors. I'll try to install the internal battery behind rear wheel.
Verstuurd vanaf mijn SM-G960F met Tapatalk
-
addictR1
- Posts: 1878
- Joined: Sun Jun 10, 2012 1:11 am
by addictR1 on Fri Sep 13, 2019 4:57 am
jorisee01 wrote:Internal wires are done. I use speaker wires soldered to di2 connectors. I'll try to install the internal battery behind rear wheel.
Verstuurd vanaf mijn SM-G960F met Tapatalk
Damn that’s a big hole. Did you do that or was that there to begin with?
Also have you tried internal routing?
Sent from my iPhone using Tapatalk
-
jorisee01
- Posts: 386
- Joined: Mon May 04, 2015 8:22 pm
by jorisee01 on Fri Sep 13, 2019 6:19 pm
joejack951 wrote:addictR1 wrote: ↑Fri Sep 13, 2019 4:57 am
Also have you tried internal routing?
I think I see the other end of that wire exiting from the frame at some point further towards the headtube.
It's almost all internal. Around the BB is still something I need to find out how to do that properly. It now comes out of the frame just before the BB and then enter again in the BB.
Verstuurd vanaf mijn SM-G960F met Tapatalk
-
jorisee01
- Posts: 386
- Joined: Mon May 04, 2015 8:22 pm
by jorisee01 on Fri Sep 13, 2019 6:20 pm
joejack951 wrote:jorisee01 wrote: ↑Mon Sep 09, 2019 8:54 pm
Received the headset conversion from INNI. Looks really well made.
I do have an issue pressing it in. So I ordered a BB press. I used a DIY thing for previous pressfit tasks.
Verstuurd vanaf mijn SM-G960F met Tapatalk
-
addictR1
- Posts: 1878
- Joined: Sun Jun 10, 2012 1:11 am
by addictR1 on Sat Sep 14, 2019 5:46 pm
jorisee01 wrote:I did that. I want to be able to put the internal Di2 battery in there. I will dremel it to make better edges.
Verstuurd vanaf mijn SM-G960F met Tapatalk
Will look clean after you Dremel it.
Sent from my iPad using Tapatalk
-
jorisee01
- Posts: 386
- Joined: Mon May 04, 2015 8:22 pm
by jorisee01 on Wed Sep 18, 2019 9:35 pm
She made her first meters. Battery still strapped to the bottle cage so not pictures just yet. Also want to get the position right first.
Verstuurd vanaf mijn SM-G960F met Tapatalk
-
none
- Posts: 291
- Joined: Mon Dec 17, 2018 11:29 pm
- Location: NE PA