Folks,
I’m entertaining idea to reuse 2014 SR chainset on disc frame with SR EPS derailleurs and H11 levers.
Does it work?
Thanks
2014 SR chainset on disc frame
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 1162
- Joined: Fri Feb 18, 2005 6:50 pm
- Location: Wilmington, DE
- Contact:
Not exactly answering your question but I am running a 2016 Chorus chrankset on a disc frame (142mm thru axle rear) without issue. Front shifting works as it should with no rub in either ring using the full cassette. I am using matching Chorus mechanical (non-hydro) shifters with TRP HY/RD calipers for what it’s worth.
The disc-specific stuff might work slightly better but in my experience the non-disc stuff works just fine with the wider disc frame dropouts.
The disc-specific stuff might work slightly better but in my experience the non-disc stuff works just fine with the wider disc frame dropouts.
I think I remember reading that the 2015+ 4-arm cranks were not changed at all with the introduction of the latest 11 speed "HO" groups (other than the HO label to match the updated rear derailleur and shifters/brakes).
karhu: compare the chainline of what you have with the 2015+ 4 arm cranksets. If it's the same I would imagine there should be no issues.
karhu: compare the chainline of what you have with the 2015+ 4 arm cranksets. If it's the same I would imagine there should be no issues.