Ceramic Speed vs.THM BB For Tarmac SL6.

[tabl10s]

Which is the better solution overall(have Clavicula SE)?

[KCookie]

I use a C-bear BB with my THM crank, lighter than both and cheaper than Ceramic Speed.

Sent from my SM-G960F using Tapatalk

[tabl10s]

Bit the bullet and ordered THM ceramic. Upgrading five bikes in two years, sucks.

[spdntrxi]

I use the THM with the THM... 3 bikes in one year sucks too.

[stermyx]

Hello, I have an SL6 with the normal stock bearings. Do i need something special to fit the THM Claviculas??

Thanks.

[spdntrxi]

Hello, I have an SL6 with the normal stock bearings. Do i need something special to fit the THM Claviculas??

Thanks.

as long its it 30mm ... no

[stermyx]

Hello, I have an SL6 with the normal stock bearings. Do i need something special to fit the THM Claviculas??

Thanks.

as long its it 30mm ... no

Thanks, i think all the THM Claviculas are 30mm, or im wrong??

[spdntrxi]

Hello, I have an SL6 with the normal stock bearings. Do i need something special to fit the THM Claviculas??

Thanks.

as long its it 30mm ... no

Thanks, i think all the THM Claviculas are 30mm, or im wrong??

I was talking if you BB is 30mm. ... you could of have shimano cranks in your SL6 before and those 24mm.. I dont know.

[stermyx]

Hello, I have an SL6 with the normal stock bearings. Do i need something special to fit the THM Claviculas??

Thanks.

as long its it 30mm ... no

Thanks, i think all the THM Claviculas are 30mm, or im wrong??

I was talking if you BB is 30mm. ... you could of have shimano cranks in your SL6 before and those 24mm.. I dont know.

Aaaah ok, sorry. I have the Sworks Cranks, i think its 30mm.

[spdntrxi]

they are 30mm

[markdjr]

as long its it 30mm ... no

Thanks, i think all the THM Claviculas are 30mm, or im wrong??

I was talking if you BB is 30mm. ... you could of have shimano cranks in your SL6 before and those 24mm.. I dont know.

Aaaah ok, sorry. I have the Sworks Cranks, i think its 30mm.

I ended up going with an outboard BB for my SL5 to accommodate the wide THM spindle. I am not sure if the standard changed between SL5 and SL6. In my case, I believe there is an improvement in perceived stiffness due to the wider BB.

[stermyx]

Thanks, i think all the THM Claviculas are 30mm, or im wrong??

I was talking if you BB is 30mm. ... you could of have shimano cranks in your SL6 before and those 24mm.. I dont know.

Aaaah ok, sorry. I have the Sworks Cranks, i think its 30mm.

I ended up going with an outboard BB for my SL5 to accommodate the wide THM spindle. I am not sure if the standard changed between SL5 and SL6. In my case, I believe there is an improvement in perceived stiffness due to the wider BB.

Yes, i noticed that an external BB to make the BB wider is needed for fitting the THM Clavicula to the SL6. I'm a little disappointed because the idea of putting THM was to reduce the weight of the Sworks cranks a lot and if you have to mount an external BB, apart from costing more, it increases the weight of the normal BB of the SL6 by 50-60 grams...

[stermyx]

I use a C-bear BB with my THM crank, lighter than both and cheaper than Ceramic Speed.

Sent from my SM-G960F using Tapatalk

Do you know the weight of the Cbear ones??

THM Regular --> 84,8gr https://r2-bike.com/THM-CARBONES-Bottom ... B30-Frames
THM Ceramic --> 80,9gr https://r2-bike.com/THM-CARBONES-Bottom ... B30-Frames

[KCookie]

Mine was 55.6g.

Sent from my SM-G986B using Tapatalk

[stermyx]

Mine was 55.6g.

Sent from my SM-G986B using Tapatalk

Only?? This model?? https://www.c-bear.com/en/products/bott ... -clavicula

I see in another post of other user, that he weighted it at 92g, figure that seems in line with the THM ones more or less.