Scott Addict Disc 2020

Discuss light weight issues concerning road bikes & parts.
Marvinman
Posts: 12
Joined: Fri Jan 17, 2020 6:23 pm

by Marvinman

Thx - same as my current setup

by Weenie


pmprego
Posts: 297
Joined: Mon Jan 21, 2019 3:16 pm

by pmprego

Aeo wrote:
Tue Apr 07, 2020 9:43 pm
One size S frameset still available at Bike24
I'm not a special client, far from it and in my lbs was significantly cheaper than that.

REDUTOPIA
Posts: 153
Joined: Mon Jul 13, 2015 7:27 pm

by REDUTOPIA

For sram RED AXS

which is the correct??

Image

Marvinman
Posts: 12
Joined: Fri Jan 17, 2020 6:23 pm

by Marvinman

Whilst I'm waiting for my frameset to arrive, I'm looking at some weight saving thru axles. I've looked around at a few inc. tune, DT Swiss, enve and aserra, and I'm wondering:

- anyone got any recommendations; and

- what sizes should I be looking for, front and rear (can't seem to see it on Scott website).

Thx

TobinHatesYou
Posts: 5452
Joined: Mon Jul 24, 2017 12:02 pm

by TobinHatesYou

Marvinman wrote:
Sat Apr 11, 2020 10:14 pm
Whilst I'm waiting for my frameset to arrive, I'm looking at some weight saving thru axles. I've looked around at a few inc. tune, DT Swiss, enve and aserra, and I'm wondering:

- anyone got any recommendations; and

- what sizes should I be looking for, front and rear (can't seem to see it on Scott website).

Thx

12x100 and 12x142, 1.5mm thread pitch. Ask a current owner to measure the length of their current thru axles minus the head.

Beancouter
Posts: 614
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

From memory I posted the lengths (or pictures) earlier in the thread. I will check again later


Sent from my iPhone using Tapatalk

Beancouter
Posts: 614
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Here you go - these are the ones supplied OEM

Image


Sent from my iPhone using Tapatalk

FactoryMatt
Posts: 255
Joined: Tue Apr 14, 2015 4:35 am

by FactoryMatt

Marvinman wrote:
Sat Apr 11, 2020 10:14 pm
Whilst I'm waiting for my frameset to arrive, I'm looking at some weight saving thru axles. I've looked around at a few inc. tune, DT Swiss, enve and aserra, and I'm wondering:

- anyone got any recommendations; and

- what sizes should I be looking for, front and rear (can't seem to see it on Scott website).

Thx
Carbon-ti or extralite

spdntrxi
Posts: 3646
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

Robert Axle projects are pretty light as well

Beancouter
Posts: 614
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

The OEM ones are 77g for reference


Sent from my iPhone using Tapatalk

Marvinman
Posts: 12
Joined: Fri Jan 17, 2020 6:23 pm

by Marvinman

Great thx all for replies. Plenty of helpful info. I'm getting the frame custom painted so once it's built up I'll post some pics

TobinHatesYou
Posts: 5452
Joined: Mon Jul 24, 2017 12:02 pm

by TobinHatesYou

Beancouter wrote:
Sun Apr 12, 2020 3:48 pm
Here you go - these are the ones supplied OEM

Image

Hmmm, do those measurements include the head? 126mm is quite wide for a front axle. Could you measure them with a ruler?

Beancouter
Posts: 614
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Measured - the 126 includes the thread


Sent from my iPhone using Tapatalk

dannywin42
Posts: 172
Joined: Wed Jan 01, 2020 5:34 pm

by dannywin42

And the head presumably. Width between fork is nominally 100mm so with 13.5mm thread length leaves 12 ish for the head.

Sent from my SM-G975F using Tapatalk


Beancouter
Posts: 614
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

No, excluding the head.


Sent from my iPhone using Tapatalk

by Weenie


Post Reply