Scott Addict Disc 2020

[VeloHelo]

Since I am not riding an addict, I am wondering if it could be fitted to my bike. Therefore these information would be very helpful. Couldn't find them using the search

The steerer is 1 1/4", as is the cockpit. Are you sure it fits?

[VeloHelo]

double post

[ddddd1]

The steerer is 1 1/4", as is the cockpit. Are you sure it fits?

1 1/4" fits everything as you can use reducer to 1 1/8"

[GeoffS]

Can someone tell me, wich "angle" the stem of the cockpit has?
Also I would be interested in the distance between the two clamping bolts and the width of the clamping area/spacers. (From a Frontal Point of view)

Stem angle is -6 deg. Distance between bolts is 15mm.
Not sure what width you are looking for?

[Lozaen]

Thanks,

I am looking for actual external width of the stem/Spacers.
This probably won't affect if it fits mechanically, but if it is going to look nice.

-6 degrees is promising.
A reduction sleeve from 1 1/4 to 1 1/8 is no problem:)

[GeoffS]

I am looking for actual external width of the stem/Spacers.

About 56mm. I previously scanned one of the spacers (I'm an engineering nerd - can't help myself )

[Lozaen]

I am looking for actual external width of the stem/Spacers.

About 56mm. I previously scanned one of the spacers (I'm an engineering nerd - can't help myself )

Thanks for this very helpful information
Will come back to you, if I need a STP File

[Diegasmus]

[BianchiDave]

There is an (fairly brief) Addict RC manual on the Scott website but it is a little difficult to find. Relevant sections from it are shown below.
headstet.png

The metal spacers are only used if you want to experiment with setting the height of the stem before cutting the steerer tube to length. Earlier in this thread somewhere there are some photos.

You can't change the angle of the bar.

For anyone who has made the switch from standard two piece Creston bars/stem to IC SL, did you have to buy the SL spacer kit separately or did it come packaged with the bars?
And I guess the IC spacers are not suitable at all with the one piece system?
Cheers

[GeoffS]

For anyone who has made the switch from standard two piece Creston bars/stem to IC SL, did you have to buy the SL spacer kit separately or did it come packaged with the bars?

Spacers are included with the iC SL bars.

What came with my bar kit

And I guess the IC spacers are not suitable at all with the one piece system?

Correct. They are a different profile (viewed from the side) around the front removable part.

[BianchiDave]

For anyone who has made the switch from standard two piece Creston bars/stem to IC SL, did you have to buy the SL spacer kit separately or did it come packaged with the bars?

Spacers are included with the iC SL bars.
IMG_4453.JPG

And I guess the IC spacers are not suitable at all with the one piece system?

Correct. They are a different profile (viewed from the side) around the front removable part.

thats great, thanks Geoff

[SiGNAL]

Happy snaps of my custom addict rc, currently weighing at 7.34kg with pedals,mounts and cages with the 60mm wheels

Have ordered and awaiting delivery of 45mm wheels and hoping to get it under 7kg

[Mikkelk]

I lost the pinol bolt to which holts the seatpost. Cant find out expect for in the UK ( With brexit, too much tax )

Does anyone know the dimentions of it ?

[Marvinman]

Below is the reply I had from Scott on the seatpost screw for my 2020 frame:

'Good Afternoon
Thank you for reaching out to us regarding your Addict RC seat clamp.

The Spec of the grub screw is M6 x 0.75mm thread pitch with a flat head.

We have managed to find a replacement grub screw for you which we will send out to the address in your signature, we have also attached the instructions of how to set this clamp up.

Kind Regards
Your Scott Sports Team'

I also bought some from these guys below in the UK but never had to try them out because Scott found me a replacement. You could give them a try they were very helpful on the phone.

https://simplybearings.co.uk/shop/

[Gunter73]

PXL_20210430_090526497.jpg
PXL_20210430_090542414.jpg
PXL_20210430_090656871.jpg

Happy snaps of my custom addict rc, currently weighing at 7.34kg with pedals,mounts and cages with the 60mm wheels

Have ordered and awaiting delivery of 45mm wheels and hoping to get it under 7kg

Nice build and bike!
Happy with the Cermaicspeed pulley ?
(also consider this)