Factor O2 VAM

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

cunn1n9
Posts: 221
Joined: Sat Jan 15, 2011 1:24 am

by cunn1n9

dudemanppl wrote:Uh the previous O2 definitely could run mechanical
They were two different frames. One for mechanical another for electronic


Sent from my iPhone using Tapatalk

antihero
Posts: 14
Joined: Mon Dec 16, 2019 6:17 pm

by antihero

I just picked up this bike. By far best bike I have ridden. Super stiff. Very comfortable and rides like a rocket

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Erwin
Posts: 249
Joined: Sat Feb 06, 2016 11:13 am
Location: Bavaria

by Erwin

kode54 wrote:
Tue Aug 13, 2019 4:25 pm
@moyboy,

the little cover that snaps on the upper part of the down tube...is that for the Di2 junction A?
i know you're using eTap so that's not an issue, but I was just wondering what that cover was for.
I am also wondering if you can put the RS910 there?

eurostar
Posts: 465
Joined: Tue Nov 02, 2004 7:19 pm
Location: London

by eurostar

The weights of 920g or 940g which people are quoting...do they include the headset?

kode54
Posts: 3748
Joined: Tue May 23, 2006 9:39 pm

by kode54

Erwin wrote:
Fri Nov 27, 2020 8:29 pm
kode54 wrote:
Tue Aug 13, 2019 4:25 pm
@moyboy,

the little cover that snaps on the upper part of the down tube...is that for the Di2 junction A?
i know you're using eTap so that's not an issue, but I was just wondering what that cover was for.
I am also wondering if you can put the RS910 there?
Yes, I fit a 3-port junctionA in that slot.
- Factor Ostro VAM Disc
- Factor LS Disc
- Specialized Aethos Disc
- Sturdy Ti Allroad Disc
- Guru Praemio R Disc

CR987
Posts: 155
Joined: Sun Jan 26, 2020 10:37 am

by CR987

I fitted the EW90A 3 port junction box in that slot instead of sitting under the stem. I wrapped it in a bit of thin foam to stop any rattles and also a small wire so I can fish it out for charging (luckily that's only every 2 or 3 months)

kode54
Posts: 3748
Joined: Tue May 23, 2006 9:39 pm

by kode54

CR987 wrote:
Mon Jul 19, 2021 11:01 pm
I fitted the EW90A 3 port junction box in that slot instead of sitting under the stem. I wrapped it in a bit of thin foam to stop any rattles and also a small wire so I can fish it out for charging (luckily that's only every 2 or 3 months)
I used foam as well to prevent rattles. I used a small zip tie and left the pigtail so i can pull it out when I need to charge it. I did have to shave a portion of the 3-port juction so that it fits without jamming it in.
- Factor Ostro VAM Disc
- Factor LS Disc
- Specialized Aethos Disc
- Sturdy Ti Allroad Disc
- Guru Praemio R Disc

Post Reply