Weight Weenies

I can second the Raceware. Light. Just not integrated

I can second the Raceware. Light. Just not integrated. It's what I use.

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com

True, not integrated, but it does hide the garmin in the shadow of the bars.

petosagan wrote: ↑

Sat May 11, 2019 10:29 pm

wheelsONfire wrote:

petosagan wrote: ↑

Sat May 11, 2019 8:49 pm

wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike

Dont have enve stem but Thanks

Envoyé de mon SM-A530W en utilisant Tapatalk

Enve stem? Why in heavens name would you need an Enve stem?
There's probably atleast 50 different versions.
Have you even looked at the link?

http://edge-mount.bike/?post_type=product

These mounts cost around 50 Euros and as far as i've seen the F3 cost more (atleast mine did)

I said enve cause someone told me something earlier about enve mount and I just make a mistake, not a big deal..

On the f3 mount, I see 59$ on the website and they give 15% off.. so 50€ should be higher.. but I have to see if edge have something for my stem... cannondale c1

Envoyé de mon SM-A530W en utilisant Tapatalk

Measure center to center of the bolt holes of your stem, then you pick the size suiting your stem.

Regarding F3 mounts. If you are in EU those mounts (if imported) will be taxed.

wheelsONfire wrote:

petosagan wrote: ↑

Sat May 11, 2019 10:29 pm

wheelsONfire wrote:

petosagan wrote: ↑

Sat May 11, 2019 8:49 pm

Dont have enve stem but Thanks

Envoyé de mon SM-A530W en utilisant Tapatalk

Enve stem? Why in heavens name would you need an Enve stem?
There's probably atleast 50 different versions.
Have you even looked at the link?

http://edge-mount.bike/?post_type=product

These mounts cost around 50 Euros and as far as i've seen the F3 cost more (atleast mine did)

I said enve cause someone told me something earlier about enve mount and I just make a mistake, not a big deal..

On the f3 mount, I see 59$ on the website and they give 15% off.. so 50€ should be higher.. but I have to see if edge have something for my stem... cannondale c1

Envoyé de mon SM-A530W en utilisant Tapatalk

Measure center to center of the bolt holes of your stem, then you pick the size suiting your stem.

Regarding F3 mounts. If you are in EU those mounts (if imported) will be taxed.

My cannondale seems to be 14mm
And on edge mount I see 9mm or 17 mm nothing between unfortunately

Envoyé de mon SM-A530W en utilisant Tapatalk

Odd, my Cannondale C1 stem has a 24mm spacing (horizontal distance between two bolts at their center) which would require this model.

Dan Gerous wrote:Odd, my Cannondale C1 stem has a 24mm spacing (horizontal distance between two bolts at their center) which would require this model.

Lol.
Yep 24.. not 14 ... Sorry

Envoyé de mon SM-A530W en utilisant Tapatalk

wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike

Probably cheaper but not necessarily less quality. At least I'm super happy with the Edge Mount for my Pro Vibe stem.


Sent from my Nokia 8 Sirocco using Tapatalk

reknop wrote: ↑

Sun May 12, 2019 4:44 pm

wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike

Probably cheaper but not necessarily less quality. At least I'm super happy with the Edge Mount for my Pro Vibe stem.


Sent from my Nokia 8 Sirocco using Tapatalk

No, not better. But i have 14 stems and i for sure will buy a new as soon as a light weight - 10 degree stem comes out.
My Easton is 138g at 120mm.
Buying a fixed size front out mount wouldn't be reasonable for me. Last 6-7 months alone, i bought 3 new stems.

I'd been going for Alpitude mount (15g but no bolt), but i don't believe in a stem front out mount, held with only 1 bolt.
Probability that it start to dip left or right seems very likely. I might be wrong though!

F3 mount isn't really that light (28g + 1g for alu spacers but no bolts), but it's stiff and it's modular. I doubt it'll dip so it's making reason from my point of view.

wheelsONfire wrote:

reknop wrote: ↑

Sun May 12, 2019 4:44 pm

wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike

Probably cheaper but not necessarily less quality. At least I'm super happy with the Edge Mount for my Pro Vibe stem.


Sent from my Nokia 8 Sirocco using Tapatalk

Buying a fixed size front out mount wouldn't be reasonable for me. Last 6-7 months alone, i bought 3 new stems.

F3 mount isn't really that light (28g + 1g for alu spacers but no bolts), but it's stiff and it's modular. I doubt it'll dip so it's making reason from my point of view.

I don't switch stems that often

Sent from my Nokia 8 Sirocco using Tapatalk

That kind of mount seems to be nice.

https://rover.ebay.com/rover/0/0/0?mpre ... 2675579365

Envoyé de mon SM-A530W en utilisant Tapatalk

Got raceware to custom a mount specific for Garmin 130 and integrated exposure light mount - 18g.

Save significant weight by not using a gopro-type mount, drawback is that the light is at a fixed angle (4° tilted down)