Garmin mount
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 964
- Joined: Thu May 10, 2018 2:43 am
True, not integrated, but it does hide the garmin in the shadow of the bars.
- wheelsONfire
- Posts: 6283
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
Measure center to center of the bolt holes of your stem, then you pick the size suiting your stem.petosagan wrote: ↑Sat May 11, 2019 10:29 pmI said enve cause someone told me something earlier about enve mount and I just make a mistake, not a big deal..wheelsONfire wrote:Enve stem? Why in heavens name would you need an Enve stem?petosagan wrote: ↑Sat May 11, 2019 8:49 pmDont have enve stem but ThankswheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike
Envoyé de mon SM-A530W en utilisant Tapatalk
There's probably atleast 50 different versions.
Have you even looked at the link?
http://edge-mount.bike/?post_type=product
These mounts cost around 50 Euros and as far as i've seen the F3 cost more (atleast mine did)
On the f3 mount, I see 59$ on the website and they give 15% off.. so 50€ should be higher.. but I have to see if edge have something for my stem... cannondale c1
Envoyé de mon SM-A530W en utilisant Tapatalk
Regarding F3 mounts. If you are in EU those mounts (if imported) will be taxed.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
My cannondale seems to be 14mmwheelsONfire wrote:Measure center to center of the bolt holes of your stem, then you pick the size suiting your stem.petosagan wrote: ↑Sat May 11, 2019 10:29 pmI said enve cause someone told me something earlier about enve mount and I just make a mistake, not a big deal..wheelsONfire wrote:Enve stem? Why in heavens name would you need an Enve stem?
There's probably atleast 50 different versions.
Have you even looked at the link?
http://edge-mount.bike/?post_type=product
These mounts cost around 50 Euros and as far as i've seen the F3 cost more (atleast mine did)
On the f3 mount, I see 59$ on the website and they give 15% off.. so 50€ should be higher.. but I have to see if edge have something for my stem... cannondale c1
Envoyé de mon SM-A530W en utilisant Tapatalk
Regarding F3 mounts. If you are in EU those mounts (if imported) will be taxed.
And on edge mount I see 9mm or 17 mm nothing between unfortunately
Envoyé de mon SM-A530W en utilisant Tapatalk
- Dan Gerous
- Posts: 2413
- Joined: Sun Aug 12, 2007 6:28 pm
Odd, my Cannondale C1 stem has a 24mm spacing (horizontal distance between two bolts at their center) which would require this model.
Lol.Dan Gerous wrote:Odd, my Cannondale C1 stem has a 24mm spacing (horizontal distance between two bolts at their center) which would require this model.
Yep 24.. not 14 ... Sorry
Envoyé de mon SM-A530W en utilisant Tapatalk
Probably cheaper but not necessarily less quality. At least I'm super happy with the Edge Mount for my Pro Vibe stem.wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike
Sent from my Nokia 8 Sirocco using Tapatalk
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
https://www.cycling-review.net
https://www.cycling-review.net
- wheelsONfire
- Posts: 6283
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
No, not better. But i have 14 stems and i for sure will buy a new as soon as a light weight - 10 degree stem comes out.reknop wrote: ↑Sun May 12, 2019 4:44 pmProbably cheaper but not necessarily less quality. At least I'm super happy with the Edge Mount for my Pro Vibe stem.wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike
Sent from my Nokia 8 Sirocco using Tapatalk
My Easton is 138g at 120mm.
Buying a fixed size front out mount wouldn't be reasonable for me. Last 6-7 months alone, i bought 3 new stems.
I'd been going for Alpitude mount (15g but no bolt), but i don't believe in a stem front out mount, held with only 1 bolt.
Probability that it start to dip left or right seems very likely. I might be wrong though!
F3 mount isn't really that light (28g + 1g for alu spacers but no bolts), but it's stiff and it's modular. I doubt it'll dip so it's making reason from my point of view.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
I don't switch stems that oftenwheelsONfire wrote:Buying a fixed size front out mount wouldn't be reasonable for me. Last 6-7 months alone, i bought 3 new stems.reknop wrote: ↑Sun May 12, 2019 4:44 pmProbably cheaper but not necessarily less quality. At least I'm super happy with the Edge Mount for my Pro Vibe stem.wheelsONfire wrote:If you want a cheaper mount, you can look at this link
http://edge-mount.bike
Sent from my Nokia 8 Sirocco using Tapatalk
F3 mount isn't really that light (28g + 1g for alu spacers but no bolts), but it's stiff and it's modular. I doubt it'll dip so it's making reason from my point of view.
Sent from my Nokia 8 Sirocco using Tapatalk
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
https://www.cycling-review.net
https://www.cycling-review.net
That kind of mount seems to be nice.
https://rover.ebay.com/rover/0/0/0?mpre ... 2675579365
Envoyé de mon SM-A530W en utilisant Tapatalk
https://rover.ebay.com/rover/0/0/0?mpre ... 2675579365
Envoyé de mon SM-A530W en utilisant Tapatalk