Cannondale supersix PF30a to campy bottom bracket?

[r33prman]

Currently my Suprsix EVO hi mod is built up in sram red22 mechanical using. Hambini PF30a to bb30 bottom bracket. Looking at moving to campy chorus or record (don’t know why I think I’ve just caught the campy bug).

Hoping you all can help with a bottom bracket recommendation.

Frame is PF30a so I’ll need a PF30a to Campagnolo ultra torque bb. Does a product like that exist? What have people run?

Please tell me I’m not doomed to run a different crankset as I’d like the full matching group.

Cheers,

DT.

[Miller]

https://www.condorcycles.com/collection ... b30a-73x42

[Karvalo]

https://www.condorcycles.com/collection ... b30a-73x42

Those are not PF30a cups.

[r33prman]

That’s what I was thinking. Anyone else got a solution? I found a ceramic speed one but $$$$$$$$$

[Dan Gerous]

BBInfinite has this: https://www.bbinfinite.com/products/pre ... ltratorque

I don't have any experience with it though.

[FlemishCompact]

BBInfinite and Ceramic Speed make pf30a to campy adapters. I’ve only seen the latter sold with their bearings.

[r33prman]

Thanks guys. I’ll keep looking into it. Seems a lot of people who run campy run a cannondale crank.

[ParisCarbon]

https://www.bike24.com/p2119513.html?q= ... 0bb%20cups

Pressfit 30 cups 68X46 listed here...

If you go with the BBInfinite setup be aware that once its "in" its in... you can't get it out without there special tools.. Ive got their system in my Evo with Cannondale cranks and it did eliminate all the creaks..

Another option would be this:

https://praxiscycles.com/product/conv-bb-campagnolo/

Just the sleeve/cups can still use the Campy bearings...

[r33prman]

Thanks. I’ve emailed hambini aswell to see if he can make something.

Annoying to do all this research when the bike in this article is at a campy demo so there must be a factory solution. Same as my frame

https://roadcyclinguk.com/gear/gear-new ... brake.html

[r33prman]

https://www.bike24.com/p2119513.html?q= ... 0bb%20cups

Pressfit 30 cups 68X46 listed here...

If you go with the BBInfinite setup be aware that once its "in" its in... you can't get it out without there special tools.. Ive got their system in my Evo with Cannondale cranks and it did eliminate all the creaks..

Another option would be this:

https://praxiscycles.com/product/conv-bb-campagnolo/

Just the sleeve/cups can still use the Campy bearings...

Are those cups PF30A or PF30?

[Karvalo]

https://www.bike24.com/p2119513.html?q= ... 0bb%20cups

Pressfit 30 cups 68X46 listed here...

68x46 is not PF30a.

Another option would be this:

https://praxiscycles.com/product/conv-bb-campagnolo/

Another option for PF30, not PF30a.

[r33prman]

So looks like unless campy reply to my email and tell me why they used on that dale above from the 12sp SR launch I’ll have to go with bb infinite or fingers crossed my man hambini can do something.

[DartanianX]

There is a company called wishbone who also do a PF30a to Campagnolo Ultra Torque.

I’ve used a Shimano BB and it was sound for the 12months I had that bike


Sent from my iPhone using Tapatalk

[Miller]

Those are not PF30a cups.

Ah, fair point. Too many "standards".

[r33prman]

Those are not PF30a cups.

Ah, fair point. Too many "standards".

Accurate ‍♂️