Chain riding on sprocket teeth (Campagnolo 12 speed)

[XCProMD]

Top pulley definitely too close to 32.


Skickat från min iPhone med Tapatalk

[mag]

I can only compare with the 11-29 cassette but it really looks to be too close to the 32t sprocket.
How does it look like on the 11t from the side?

[Guerdi]

Nice hre wheels I see in the background .

[Nejmann]

I’m on 12 speed sr mechanical, and it works flawless. Can I take a picture of anything? I’m on 50/34 11-32

[taylorpetie]

I’ve also played around with the distance between the top pulley and COG (with quarter turn tightening of the screw). For each quarter turn increase, I then restart from scratch (detach tension cable etc... reset starting point).. Increased the pulley distance from around 5mm to point there was around 6.5mm distance and same outcome regardless of the distance.

[taylorpetie]

I’m on 12 speed sr mechanical, and it works flawless. Can I take a picture of anything? I’m on 50/34 11-32

Any chance you take a pic of the top pulley alignment with the smalll CoG from the rear? I’m curious whether there is a slight inward angle. And curious how much space you’ve set between the COG and top pulley. Thanks

[Nejmann]

I’m on 12 speed sr mechanical, and it works flawless. Can I take a picture of anything? I’m on 50/34 11-32

Any chance you take a pic of the top pulley alignment with the smalll CoG from the rear? I’m curious whether there is a slight inward angle. And curious how much space you’ve set between the COG and top pulley. Thanks

What ring in the front?

[taylorpetie]

Big chain ring. Thanks!

[taylorpetie]

delete double post

[Nejmann]

Sorry for the dirty drivetrain, got caught in the rain earlier today. Took some photos on big-small and big-big.