Page 215 of 221

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 29, 2021 2:58 pm
by mustafah009
vneilv wrote:
Wed Jul 28, 2021 11:44 am
Has anyone posted these yet? Supersix EVO SE?

https://ciclimattio.com/p/supersix-evo- ... 0c63b1c8e1

I'm sure that these are just mock ups but some interesting things to note.

Looks like its some sort of AXS with a flat top chain yet it has a spidering - will Cannondale update these to run 12 speed chains? I know it can work with the older 11 speed rings but an update would be nice.

Stem looks interesting, alloy but with integrated cabling. Once again could just be a mock up but would love to see a lighter version of the current Cannondale bar / stem combo.
You can partially see it here:

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 29, 2021 2:58 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 29, 2021 8:21 pm
by Wenne
4AE94492-72DB-43DB-B6B4-825057B514A5.jpeg
mustafah009 wrote:
Thu Jul 29, 2021 2:58 pm
vneilv wrote:
Wed Jul 28, 2021 11:44 am
Has anyone posted these yet? Supersix EVO SE?

https://ciclimattio.com/p/supersix-evo- ... 0c63b1c8e1

I'm sure that these are just mock ups but some interesting things to note.

Looks like its some sort of AXS with a flat top chain yet it has a spidering - will Cannondale update these to run 12 speed chains? I know it can work with the older 11 speed rings but an update would be nice.

Stem looks interesting, alloy but with integrated cabling. Once again could just be a mock up but would love to see a lighter version of the current Cannondale bar / stem combo.
You can partially see it here:

Re: Are We Getting A New Cannondale Supersix?

Posted: Sun Aug 01, 2021 9:04 pm
by Prosper00
Any idea what size disc calliper bolts I should be using on a Sram Force AXS Supersix?

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Aug 03, 2021 4:12 am
by Mcdeez
2020 supersix still rolling strong,abused ,no cracks on the frame, love itImage

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Aug 03, 2021 10:06 am
by WorkonSunday
Anyone seen a supersix (disc brake version) being fitted with cable actuated calipers? the ones im most intersted in is TRP HY-ROAD. thanks.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Aug 03, 2021 10:48 am
by oldmac
WorkonSunday wrote:
Tue Aug 03, 2021 10:06 am
Anyone seen a supersix (disc brake version) being fitted with cable actuated calipers? the ones im most intersted in is TRP HY-ROAD. thanks.
There is not enough room for TRP HY-ROAD to install at rear brake.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Aug 03, 2021 1:14 pm
by WorkonSunday
oldmac wrote:
Tue Aug 03, 2021 10:48 am
WorkonSunday wrote:
Tue Aug 03, 2021 10:06 am
Anyone seen a supersix (disc brake version) being fitted with cable actuated calipers? the ones im most intersted in is TRP HY-ROAD. thanks.
There is not enough room for TRP HY-ROAD to install at rear brake.
ah, thats what i thought. oh well...there goes that idea. :?

thanks.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Aug 03, 2021 5:56 pm
by Hexsense
Juintech F1 and juintech GT-F might fit. It's a lot smaller than Hyrd.

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 3:30 am
by oldmac
Hexsense wrote:
Tue Aug 03, 2021 5:56 pm
Juintech F1 and juintech GT-F might fit. It's a lot smaller than Hyrd.
Don't use Juintech brake on Supersix or Systemsix, it feels terrible.

That is my personal experience.

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 10:30 am
by WorkonSunday
oldmac wrote:
Wed Aug 04, 2021 3:30 am
Hexsense wrote:
Tue Aug 03, 2021 5:56 pm
Juintech F1 and juintech GT-F might fit. It's a lot smaller than Hyrd.
Don't use Juintech brake on Supersix or Systemsix, it feels terrible.

That is my personal experience.
is that Juintech in general or because of something specific about the supersix/systemsix combo ?

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 12:41 pm
by RDY
The GT-F is great. Either you haven't used it, or it was horribly badly set up if it felt 'terrible'.

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 3:45 pm
by chase7545
Anyone know approximately what size di2 wires and junction boxes I would need on a 56cm Evo with a 100mm/420mm bar setup? Building up from a frameset that's still in transit but I wanted to get all the parts ready in advance.

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 4:49 pm
by mikemelbrooks
what is the weight difference between a SI and an SISL2 crank axle?

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 10:16 pm
by Beancouter
mikemelbrooks wrote:what is the weight difference between a SI and an SISL2 crank axle?
In my experience, they are the same!


Sent from my iPhone using Tapatalk

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Aug 04, 2021 10:16 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Aug 05, 2021 3:56 am
by Dan Gerous
There was only one version of the 109mm spindle originally, they later added a second version. The original and the lighter one has holes drilled out between the splines at each ends, the other version doesn't have those holes, but the material is the same, wall thickness in the middle is the same as far as I can tell so the weight difference is probably marginal, maybe not even a factor once you install it as these holes usually get filled with grease.

I'm not sure if they have two models now or if the non-drilled version replaced the drilled one. :noidea:

The ones with holes typically weigh around 63-64 grams. I have one of the other version but can't find it, I must have installed it somewhere and wont start removing cranksets just to check the weight, sorry.