Page 150 of 167

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 02, 2020 3:02 am
by Dan Gerous
S6ED wrote:
Thu Jul 02, 2020 12:29 am
Yes, I suppose so.

By the way, Halvorsen is 176cm and it looks like he's riding a 51 size EVO. Or is it a 54?
That's a 51.

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 02, 2020 3:02 am
by Weenie

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 02, 2020 9:21 am
by req110
Gents, does anyone know, what is the maximum tire clearance? I've read 30mm + 6mm, but have you tested some?

I am thinking about winter setup, some 32mm CX tires maybe...

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 02, 2020 12:06 pm
by Tristan
req110 wrote:
Thu Jul 02, 2020 9:21 am
Gents, does anyone know, what is the maximum tire clearance? I've read 30mm + 6mm, but have you tested some?
No problem fitting 32mm GP5000 tubeless on 28mm rims on mine

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Jul 02, 2020 2:39 pm
by Dan Gerous
req110 wrote:
Thu Jul 02, 2020 9:21 am
Gents, does anyone know, what is the maximum tire clearance? I've read 30mm + 6mm, but have you tested some?

I am thinking about winter setup, some 32mm CX tires maybe...
It is 30mm officially but that's Cannondale playing it safe as it's hard to predict how big all tires can be on all rims with various level of wheel stiffness under various rider weights. So all their limits are with quite wide space around the tires.

But, I have seen a few riding 700x33 gravel/cx tires with small knobs and they didn't have any issues, I think Lachlan Morton was even using Vittoria Terrano Dry 700x35 on his. I have Panaracer GravelKings 700x32 that fit with room to spare but mine are not the SK versions with knobs but the micro diamond pattern ones. Obviously the tighter the tire gets, the more you should avoid riding in sticky mud that can build up and pick rocks that could scratch the frame and fork.

Re: Are We Getting A New Cannondale Supersix?

Posted: Fri Jul 03, 2020 9:04 pm
by N1720
Finally completed my Supersix - now that the wheels are built up it's ready to show to y'all. Big thanks to Dan Gerous for helping me sort out some problems during the build.

Image

It's mostly a stock 105 Disc build, only changes are as follows:
  • Wheels: Light Bicycle WR50 Disc Flyweight with DT Swiss 350 Hubs
  • Tires: Vittoria Corsa 28
  • Rotors: Shimano RT-MT800
  • Chainrings: 52/36 OPI Spiderring
  • Saddle: Specialized Power Comp
  • Internal Cable Routing using a diy cable stop, a cnc'd aluminum plate and some black tape
If anyone's interested in the internal cable routing mod - I can upload the CAD files I used, although some work with a file was needed to make it fit after machining, as the beveled edges on the plate aren't quite right.

Re: Are We Getting A New Cannondale Supersix?

Posted: Sat Jul 04, 2020 6:43 pm
by cjm
N1720 wrote:
Fri Jul 03, 2020 9:04 pm
Finally completed my Supersix - now that the wheels are built up it's ready to show to y'all. Big thanks to Dan Gerous for helping me sort out some problems during the build.

Image

It's mostly a stock 105 Disc build, only changes are as follows:
  • Wheels: Light Bicycle WR50 Disc Flyweight with DT Swiss 350 Hubs
  • Tires: Vittoria Corsa 28
  • Rotors: Shimano RT-MT800
  • Chainrings: 52/36 OPI Spiderring
  • Saddle: Specialized Power Comp
  • Internal Cable Routing using a diy cable stop, a cnc'd aluminum plate and some black tape
If anyone's interested in the internal cable routing mod - I can upload the CAD files I used, although some work with a file was needed to make it fit after machining, as the beveled edges on the plate aren't quite right.

That looks great!

I fancy doing something similar with a 105 disc.

Is it a 54 or 56, also what is your saddle height, and any weight figures?

I spotted this kit for the internal routing.

https://www.soigneur.co.uk/online-store/cannondalemgik

Re: Are We Getting A New Cannondale Supersix?

Posted: Sat Jul 04, 2020 6:51 pm
by cjm
What are all the BB options if I want to run a shimano crank?

Re: Are We Getting A New Cannondale Supersix?

Posted: Sat Jul 04, 2020 8:27 pm
by S6ED
cjm wrote:
Sat Jul 04, 2020 6:51 pm
What are all the BB options if I want to run a shimano crank?
This is one such option:

https://www.bike-components.de/en/SRAM/ ... -BSA-68-73

Re: Are We Getting A New Cannondale Supersix?

Posted: Sun Jul 05, 2020 8:57 pm
by N1720
cjm wrote:
Sat Jul 04, 2020 6:43 pm
Is it a 54 or 56, also what is your saddle height, and any weight figures?
56, saddle height is around 77 cm. Weight is around 8.4 kg, including gps mount, pedals and saddle bag mount.
cjm wrote:
Sat Jul 04, 2020 6:43 pm
I spotted this kit for the internal routing.

https://www.soigneur.co.uk/online-store/cannondalemgik
I'd recommend getting that instead of going the diy route - the kit is probably a lot lighter than my solution, it being plastic instead of aluminum. Should still be strong enough, and a lot less work. That kit wasn't around when I was working on my bike; would've picked it up myself if it had.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 10:22 am
by req110
6.84kg as pictured including all cages, pedals, wahoo mount, gopro mount, radar mount.
54cm, saddle 76cm, drop 11cm, reach 56cm from tip of saddle to center of bars. and yes, the uncut for is photoshopped out, i need to cut it soon.
Planning maybe SISL2 crankset and i am done hopefully. :D

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 12:22 pm
by S6ED
req110 wrote:
Tue Jul 07, 2020 10:22 am
6.84kg as pictured including all cages, pedals, wahoo mount, gopro mount, radar mount.
54cm, saddle 76cm, drop 11cm, reach 56cm from tip of saddle to center of bars. and yes, the uncut for is photoshopped out, i need to cut it soon.
Planning maybe SISL2 crankset and i am done hopefully. :D
Very nice and very good weight! With SiSL2 cranks you'll save another 70g or so (if I remember correctly).

What's the weight of this wheelset?
Is that the Far bar?
How come you're not running tubeless?

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 2:28 pm
by req110
It's roval clx50, around 1440g,

Wheelset Roval CLX 50 Disc, Turbo Cotton 26, Supersonic tubes, 160/140 CLX rotor, Red 11-28 cassette 2493g

Yes, farsports f1.

Tubeless, i was running gp5000tl, but had good deal on turbo cottons with supersonic tubes, so i switched especially because of weight saving.
I may go back to tubeless, considering pro one tle.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 4:23 pm
by S6ED
req110 wrote:
Tue Jul 07, 2020 2:28 pm
It's roval clx50, around 1440g,

Wheelset Roval CLX 50 Disc, Turbo Cotton 26, Supersonic tubes, 160/140 CLX rotor, Red 11-28 cassette 2493g

Yes, farsports f1.

Tubeless, i was running gp5000tl, but had good deal on turbo cottons with supersonic tubes, so i switched especially because of weight saving.
I may go back to tubeless, considering pro one tle.
You could consider the Hutchinson FUSION 5 GALACTIK 25mm tyre at 240g. If you add another 30ml (=30g) sealant per tyre you have 270g per wheel. It's probably one of the lightest options and they're also quite fast.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 4:38 pm
by Dan Gerous
Road tubeless is like the cross fit of bike tech: those who do it are always trying to tell everyone else they should do it! :mrgreen: :wink:

Personally, I think life is too short to deal with the added trouble, mess and cost of tubeless on the road IMO... unless you flat on a regular basis and enjoy the disconnected feel of very low pressures, otherwise there is nothing to gain performance wise. I tried it for a little over a year, didn't like the feel, either too harsh or feeling too dead, so I'm happily back on latex tubes. Paired with the suppler casings of non-tubeless tires, they are still faster to me anyway, I get better feedback from the road surface and no more gambling if a certain tire will work with a certain rim, any tire will install by hand and inflate in 2 minutes with normal pumps, I can swap tires for different conditions in 5 minutes, no need to worry if the sealant I put in two months before has completly dried...

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 6:46 pm
by thraex05
req110 wrote:
Tue Jul 07, 2020 10:22 am
6.84kg as pictured including all cages, pedals, wahoo mount, gopro mount, radar mount.
54cm, saddle 76cm, drop 11cm, reach 56cm from tip of saddle to center of bars. and yes, the uncut for is photoshopped out, i need to cut it soon.
Planning maybe SISL2 crankset and i am done hopefully. :D
Did you use the -6 or -10 degree insert for the farsports handlebar?

I'm also looking for one of these bars to mount onto my evo3.
11cm seems quite a drop with the spacers underneath the stem.
I have the same saddle height and around the same amount of stem spacers, but only a drop of 9.5cm (size 54 with traditional -6 degree stem and handlebar).

Thanks!

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jul 07, 2020 6:46 pm
by Weenie