Page 111 of 172

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 08, 2020 5:06 pm
by Dan Gerous
flashpunk wrote:
Wed Jan 08, 2020 4:53 am
Got my farsports bar installed!
Not your light bulbs though! :mrgreen: :wink:

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 08, 2020 5:06 pm
by Weenie

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 08, 2020 7:16 pm
by flashpunk
Rohel wrote:
flashpunk wrote:
Wed Jan 08, 2020 4:53 am
Got my farsports bar installed!

Image
Can you post a few more pics in different angles please?
ImageImageImage

Re: Are We Getting A New Cannondale Supersix?

Posted: Fri Jan 10, 2020 2:13 am
by flashpunk
Wondering if anyone is looking for one of those out front mounts. Since I changed to the farsports I'm not needing it anymore.

ImageImage

Re: Are We Getting A New Cannondale Supersix?

Posted: Sun Jan 12, 2020 12:06 am
by Jackofallgrades
Is anyone else suffering from brake rub under out of saddle accelerations? Having checked alignment of the rotor it does seem to be coming from flex. Is changing the thru axles for stiffer ones a solution at all?

Re: Are We Getting A New Cannondale Supersix?

Posted: Sun Jan 12, 2020 7:02 am
by hannawald
Strange..there was a test in October Tour magazine and fork side stiffness was not outstanding but still received 1.3 note, better than Trek Madone SL6 disc.

Re: Are We Getting A New Cannondale Supersix?

Posted: Mon Jan 13, 2020 10:24 am
by ch00bzs
I haven't found on this thread for the rim brake build.
Nobody interested in building a weightweenies 2020 rim brake s6 evo eh ?
Despite the non-hi mod carbon, i still think it could be lighter than disc :D

Re: Are We Getting A New Cannondale Supersix?

Posted: Mon Jan 13, 2020 5:21 pm
by floriansantana
Jackofallgrades wrote:
Sun Jan 12, 2020 12:06 am
Is anyone else suffering from brake rub under out of saddle accelerations? Having checked alignment of the rotor it does seem to be coming from flex. Is changing the thru axles for stiffer ones a solution at all?
No flex whatsoever here and I'm no lightweight.

Re: Are We Getting A New Cannondale Supersix?

Posted: Mon Jan 13, 2020 7:19 pm
by Bluechip
Jackofallgrades wrote:
Sun Jan 12, 2020 12:06 am
Is anyone else suffering from brake rub under out of saddle accelerations? Having checked alignment of the rotor it does seem to be coming from flex. Is changing the thru axles for stiffer ones a solution at all?
Yes, I get an occasional bit of brake rubbing in the front. I've got SRAM Force AXS and have come to learn that the SRAM calipers hold the pads a little closer to the rotors than the Shimano calipers. It's not frequent and goes away quickly after a couple of applications of the brakes again. Maybe I just need to bleed the brakes.

Re: Are We Getting A New Cannondale Supersix?

Posted: Mon Jan 13, 2020 8:13 pm
by cerro
ch00bzs wrote:
Mon Jan 13, 2020 10:24 am
I haven't found on this thread for the rim brake build.
Nobody interested in building a weightweenies 2020 rim brake s6 evo eh ?
Despite the non-hi mod carbon, i still think it could be lighter than disc :D
Disc are here to stay :) I think it looks cleaner with integrated hosings on the disc version compared to rim brake version. I choosed the SuperSIX Evo over Synapse because of just integration (and aero)

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jan 14, 2020 11:05 am
by Jackofallgrades
Bluechip wrote:
Mon Jan 13, 2020 7:19 pm
Jackofallgrades wrote:
Sun Jan 12, 2020 12:06 am
Is anyone else suffering from brake rub under out of saddle accelerations? Having checked alignment of the rotor it does seem to be coming from flex. Is changing the thru axles for stiffer ones a solution at all?
Yes, I get an occasional bit of brake rubbing in the front. I've got SRAM Force AXS and have come to learn that the SRAM calipers hold the pads a little closer to the rotors than the Shimano calipers. It's not frequent and goes away quickly after a couple of applications of the brakes again. Maybe I just need to bleed the brakes.
I'm on Dura-Ace so would've thought tolerance wouldn't be an issue for me, I've put 1000kms on them so was hoping it would've gone away by now...

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Jan 14, 2020 2:31 pm
by spud
might want to have your mounts machined with the Park tool or other. I don't think a lot of these frames are really being properly prepared, and disc brakes put a serious premium on correct mounting surface prep.

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 15, 2020 12:59 am
by TedTan
SuperSix Evo 105 Disc 48cm

Upgrade so far :
Roval CL50
Zipp Service Course SL Stem
Zipp Service Course SL 70 Ergo Handlebar
Ultegra Hydraulic Shifter + Caliper
Dura Ace Rotor 160mm (Front n Rear)
Prologo Dimension Saddle (Carbon Rail)

Current weight : 8.1kg

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 15, 2020 2:09 am
by g32ecs
TedTan wrote:
Wed Jan 15, 2020 12:59 am
SuperSix Evo 105 Disc 48cm

Upgrade so far :
Roval CL50
Zipp Service Course SL Stem
Zipp Service Course SL 70 Ergo Handlebar
Ultegra Hydraulic Shifter + Caliper
Dura Ace Rotor 160mm (Front n Rear)
Prologo Dimension Saddle (Carbon Rail)

Current weight : 8.1kg
Finally someone put a small person bike. Want to see more 48s here.

Nice!

What's your saddle height? Looks like a 90mm stem from afar but I'm not quite sure. Did you have a chance to weigh just the frame/fork?

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 15, 2020 2:34 am
by TedTan
g32ecs wrote:
TedTan wrote:
Wed Jan 15, 2020 12:59 am
SuperSix Evo 105 Disc 48cm

Upgrade so far :
Roval CL50
Zipp Service Course SL Stem
Zipp Service Course SL 70 Ergo Handlebar
Ultegra Hydraulic Shifter + Caliper
Dura Ace Rotor 160mm (Front n Rear)
Prologo Dimension Saddle (Carbon Rail)

Current weight : 8.1kg
Finally someone put a small person bike. Want to see more 48s here.

Nice!

What's your saddle height? Looks like a 90mm stem from afar but I'm not quite sure. Did you have a chance to weigh just the frame/fork?
Saddle height from center bb to saddle is 66cm.
The stem length is 100mm
I haven’t got a chance to weigh the frame n fork,but I can feel the weight of the front is way more heavier than my previous bike (Trek Emonda SL6)...I guess the fork is stiffer due to disc brake....


Sent from my iPhone using Tapatalk

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 15, 2020 2:34 am
by Weenie

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Jan 15, 2020 4:43 am
by Hexsense
TedTan wrote:
Wed Jan 15, 2020 12:59 am
SuperSix Evo 105 Disc 48cm

Upgrade so far :
Roval CL50
Zipp Service Course SL Stem
Zipp Service Course SL 70 Ergo Handlebar
Ultegra Hydraulic Shifter + Caliper
Dura Ace Rotor 160mm (Front n Rear)
Prologo Dimension Saddle (Carbon Rail)

Current weight : 8.1kg
This looks wayy nicer than I expected. Red color SS Evo size 48 is definitely on my interested list for sure.
However, based on stack reach and HTA calculation. To keep 5mm spacer under the stem, I need -17 degree stem 120mm long. Not sure if it'll look too disporposion to the top tube slope of the bike. :?