Page 95 of 159

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Oct 15, 2019 3:34 am
by Dan Gerous
Custom painted, built by Stage21, looks pretty nice:

Image

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Oct 15, 2019 3:34 am
by Weenie

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Oct 15, 2019 6:35 am
by Wenne
F2184A67-4FCB-4DB2-8C0D-A7876B7510CE.jpeg
:welcome:

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Oct 15, 2019 9:36 am
by S6ED
Dan Gerous wrote:
Tue Oct 15, 2019 3:34 am
Custom painted, built by Stage21, looks pretty nice:
Nice but voiding the warranty is a no go for me.

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Oct 15, 2019 4:44 pm
by Wenne
FSA -12 :thumbup:
53967106-D0D4-44A9-8095-F49F8BCBDD3C.jpeg
7D1331E3-D53D-4F99-9740-B2CF754148BD.jpeg

Re: Are We Getting A New Cannondale Supersix?

Posted: Tue Oct 15, 2019 10:49 pm
by brearley
Is there a lighter solution to pf30a bottom bracket than the token ninja setup?
As they all seem to screw together I'm thinking none are going to be sub 100g and I'd consider full ceramic replacements to the bearings to drop weight further

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 5:30 pm
by hernejj
brearley wrote:
Tue Oct 15, 2019 10:49 pm
Is there a lighter solution to pf30a bottom bracket than the token ninja setup?
As they all seem to screw together I'm thinking none are going to be sub 100g and I'd consider full ceramic replacements to the bearings to drop weight further
I guess it depends on what cranks you're planning on using. But here are the ones I know about:
https://wheelsmfg.com/bottom-brackets/c ... pf30a.html
https://www.c-bear.com/en/products/pf30a
https://www.bbinfinite.com/products/osb ... 9864585539

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 6:02 pm
by N1720
@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 6:06 pm
by Dan Gerous
Aren't the stock Cannondale alloy PF30 cups much lighter than all these? I never had any issues with them.

Image

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 6:56 pm
by Wenne
N1720 wrote:
Wed Oct 16, 2019 6:02 pm
@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?
full-length housing for the shift cables ! 8,1 kg...

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 7:11 pm
by Wenne
5CF397EE-29CE-4553-BD9A-4BF19BB4CE96.jpeg
N1720 wrote:
Wed Oct 16, 2019 6:02 pm
@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?
shifting quality good...
bike size 54 with body size 170 :noidea:

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 9:14 pm
by S6ED
Dan Gerous wrote:
Wed Oct 16, 2019 6:06 pm
Aren't the stock Cannondale alloy PF30 cups much lighter than all these? I never had any issues with them.

Image
This must indeed be the lightest option. The stock aluminium cups are very light, my bike (Evo2) came with these plus a plastic FSA sleeve (10g or so) between them that insulates the BB axle from the elements. The plastic sleeve can be removed, if one so wishes, but its good to keep it as it keeps the whole BB assembly clean and dry.

Re: Are We Getting A New Cannondale Supersix?

Posted: Wed Oct 16, 2019 9:21 pm
by S6ED
...

Are We Getting A New Cannondale Supersix?

Posted: Thu Oct 17, 2019 10:21 am
by alexneumuller
Back from the Painter. Frame weight is 830grs after repaint in a size 56

Image
C36 wrote:
alexneumuller wrote:The frame was without fork es 870gr with two small pieces of card board and some clear protector wrapping g. So probably around 850gr.

Will weigh frame and fork when I get it back.
Painted or raw frame before painting it?

I saw it in fatcreation Instagram, really nive


Sent from my iPhone using Tapatalk


Envoyé de mon iPhone en utilisant Tapatalk[/quote]



Sent from my iPhone using Tapatalk

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Oct 17, 2019 10:26 am
by alexneumuller
One piece BB would work. The piece inside is the rubber tube

ImageImage
alexneumuller wrote:Will check and take picture when the frame is back with me. Should be Thursday or Friday
TiCass wrote:Can we get more detail from the bottom bracket area, is the opening completely free from obtrusion? Can we put a one-piece bottom bracket in that?


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

Re: Are We Getting A New Cannondale Supersix?

Posted: Thu Oct 17, 2019 10:26 am
by Weenie

Re: Are We Getting A New Cannondale Supersix?

Posted: Sat Oct 19, 2019 9:02 pm
by Wenne
Devotional wrote:
Sat Aug 10, 2019 4:13 pm
Still waiting on my ship to get a 51 and a 54 in to try . I’m wondering what a 54 with a saddle height of 69.5cm from bb will look like . I’m 5ft 8 . The shop had a caad13 in 51 in . Guy told me I’d be a 54 but I’m not so sure
Frame 54 , 69,5cm from bb...