Are We Getting A New Cannondale Supersix?

Discuss light weight issues concerning road bikes & parts.

Moderator: robbosmans

Tifosiphil
Posts: 78
Joined: Wed Nov 14, 2018 11:09 pm

by Tifosiphil

Kroter wrote:
Mon Aug 10, 2020 9:28 pm
Hello guys, does anybody know the farsport handlebar cost?. Thanks

Enviado desde mi SM-N975F mediante Tapatalk
I was on their site earlier looking at wheels, think they are around $370 including the Garmin mount

by Weenie


Hexsense
Posts: 1927
Joined: Wed Dec 30, 2015 12:41 am

by Hexsense

Beancouter wrote:
Tue Aug 11, 2020 11:56 am
One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...
Whoa, when I remove it to clean last time, I'm sure mine doesn't have such tape.
Any special spec for the tape that I should pay attention? I have gorilla double sided mounting tape. It is a little thicker than 3m double sided pad so I'm not sure if it would make an okay substitute for thin 3m tape.

Beancouter
Posts: 862
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

If it were me I would just contact your LBS or cannondale for one, at least you know it’s the right spec (and it’s free!).

I am on holiday at the moment but hopefully mine will be at home when I get back tomorrow. I will take some pics


Sent from my iPhone using Tapatalk

PUNlSHER
Posts: 88
Joined: Mon Jun 24, 2019 9:44 am

by PUNlSHER

sohn wrote:
Thu Aug 13, 2020 1:20 pm
An update on my Supersix Evo Ultegra rim brake build. When I first got the bike, it weighed at 8.14kg with pedals and bottle cages.

Since then, I have replaced several parts to bring the weight down to around 7.2kg.
  • Saddle: Bontrage Montropose Pro (169g). Weight saving: 107g
  • Seatpost: Cannondale Hollowgram SL 27 KNOT Carbon (162g). Weight saving: 99g
  • Crankset: Cannondale Si Hollowgram (8-arm) (602g). Weight saving: 131g
  • Handlebars: Zipp SL-70 Aero 38cm (222g). Weight saving: 88g
  • Wheels: Parcours Grumpeur (1350g). Weight saving: 300g
  • QR skewers: Parcours (55g*2). Weight saving: 90g
  • Tyres: Continental GP5000 25mm (232g*2). Weight saving: 36g
  • Inner tubes: Continental Race Light (76g*2). Weight saving: 58g
  • Cassette: Ultegra 11-30 (269g). Weight saving: 35g
A groupset upgrade may come in the future to drop a bit more weight. I know I can also save a bit more on the crankset by going with SISL2 but 165mm cranks are not available for that series. I wasl also considering using a Kalloy Uno stem but not sure if I trust a £20 stem to hold my £200 carbon handlebars!

Image
Kalloy UNO stem absolutely normal (102g without ti-bolts) :thumbup:

Jackofallgrades
Posts: 143
Joined: Tue Oct 08, 2019 10:15 am

by Jackofallgrades

What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Cannondale SSEvo3 'Atticus' - 7.2kg
...Work in Progress viewtopic.php?f=10&t=161634

User avatar
Dan Gerous
Posts: 2056
Joined: Sun Aug 12, 2007 6:28 pm

by Dan Gerous

Jackofallgrades wrote:
Sat Aug 15, 2020 12:52 pm
What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.

Beancouter
Posts: 862
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Dan Gerous wrote:
Jackofallgrades wrote:
Sat Aug 15, 2020 12:52 pm
What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.
I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile

Image
Image


Sent from my iPhone using Tapatalk

Jackofallgrades
Posts: 143
Joined: Tue Oct 08, 2019 10:15 am

by Jackofallgrades

:thumbup: Thanks guys
Cannondale SSEvo3 'Atticus' - 7.2kg
...Work in Progress viewtopic.php?f=10&t=161634

User avatar
LeDuke
Posts: 1823
Joined: Sun Oct 07, 2012 2:39 am
Location: Front Range, CO

by LeDuke

Beancouter wrote: I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile

Image
Image


Sent from my iPhone using Tapatalk
Who makes that cradle/yoke?


Sent from my iPhone using Tapatalk

Beancouter
Posts: 862
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .

Example yoke https://r2-bike.com/SCHMOLKE-Spare-Part ... O-Seatpost

https://www.ebay.co.uk/itm/292039170215

Total example (lots of options) from R2, less than 30g

Image


Sent from my iPhone using Tapatalk

req110
Posts: 197
Joined: Thu Nov 22, 2018 10:23 am

by req110

Nothing. Delete
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6466g
#GR Factor LS AXS 2021 @ 8xxxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

lucianoz
Posts: 9
Joined: Thu May 07, 2015 2:38 pm

by lucianoz

Hi guys, i'm a old user, but i never post anything, but really like to read all the threads.
Can you help me with a doubt?
I bought last week a 2020 SSX Evo di2 womens bike for my wife, but she wont use the knot bar/stem combo, so i'll put her beloved regular round bars and stem.
So, my question is for those who bought the bicycle with the knot bar/stem combo (or anyone who knows about the parts): Does the k28000 part come with the top cap (the circuled green thing in the pictures below, becouse i really dont know how to call this in english lol)?? I mean, all the parts off the picures bellow come with the bike when is bought with the knot bar/stem?

Image
Image

Cheers guys

req110
Posts: 197
Joined: Thu Nov 22, 2018 10:23 am

by req110

Beancouter wrote:
Tue Aug 11, 2020 11:56 am
Wenne wrote:CANNONDALE SUPERSIX EVO INTERNAL SEAT BINDER, K26030
When does Cannondale make a new one ? mine is still making noise ...
I have been told there isn’t a new one.. that said, I have a replacement coming to me under warranty. I will check to see if there is any difference.

One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...Image


Sent from my iPhone using Tapatalk
I have removed the plate (which was rotated - bad) very easily there was something sticky, but not a tape, especially 3M. So i have built something like this and will give it a shot.
Attachments
Untitled.jpg
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6466g
#GR Factor LS AXS 2021 @ 8xxxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

req110
Posts: 197
Joined: Thu Nov 22, 2018 10:23 am

by req110

Beancouter wrote:
Sun Aug 16, 2020 8:32 am
Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .
this one has negative review on ebay, they say it doesn't fit supersix, so i have canceled the order.

How about the one you have now? Where from it is, how does it look like on the bike and how much does it weight please?
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6466g
#GR Factor LS AXS 2021 @ 8xxxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

by Weenie


sohn
Posts: 5
Joined: Sat Jul 20, 2019 9:27 pm

by sohn

Anyone experiencing a creaky bottom bracket with the 2020 Supersix Evo? Mine just randomly developed a creak today... Any tips for solving it?

Post Reply