Are We Getting A New Cannondale Supersix?

Discuss light weight issues concerning road bikes & parts.

Moderator: robbosmans

Tifosiphil
Posts: 145
Joined: Wed Nov 14, 2018 11:09 pm

by Tifosiphil

Kroter wrote:
Mon Aug 10, 2020 9:28 pm
Hello guys, does anybody know the farsport handlebar cost?. Thanks

Enviado desde mi SM-N975F mediante Tapatalk
I was on their site earlier looking at wheels, think they are around $370 including the Garmin mount

Hexsense
Posts: 2206
Joined: Wed Dec 30, 2015 12:41 am

by Hexsense

Beancouter wrote:
Tue Aug 11, 2020 11:56 am
One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...
Whoa, when I remove it to clean last time, I'm sure mine doesn't have such tape.
Any special spec for the tape that I should pay attention? I have gorilla double sided mounting tape. It is a little thicker than 3m double sided pad so I'm not sure if it would make an okay substitute for thin 3m tape.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Beancouter
Posts: 895
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

If it were me I would just contact your LBS or cannondale for one, at least you know it’s the right spec (and it’s free!).

I am on holiday at the moment but hopefully mine will be at home when I get back tomorrow. I will take some pics


Sent from my iPhone using Tapatalk

PUNlSHER
Posts: 90
Joined: Mon Jun 24, 2019 9:44 am

by PUNlSHER

sohn wrote:
Thu Aug 13, 2020 1:20 pm
An update on my Supersix Evo Ultegra rim brake build. When I first got the bike, it weighed at 8.14kg with pedals and bottle cages.

Since then, I have replaced several parts to bring the weight down to around 7.2kg.
  • Saddle: Bontrage Montropose Pro (169g). Weight saving: 107g
  • Seatpost: Cannondale Hollowgram SL 27 KNOT Carbon (162g). Weight saving: 99g
  • Crankset: Cannondale Si Hollowgram (8-arm) (602g). Weight saving: 131g
  • Handlebars: Zipp SL-70 Aero 38cm (222g). Weight saving: 88g
  • Wheels: Parcours Grumpeur (1350g). Weight saving: 300g
  • QR skewers: Parcours (55g*2). Weight saving: 90g
  • Tyres: Continental GP5000 25mm (232g*2). Weight saving: 36g
  • Inner tubes: Continental Race Light (76g*2). Weight saving: 58g
  • Cassette: Ultegra 11-30 (269g). Weight saving: 35g
A groupset upgrade may come in the future to drop a bit more weight. I know I can also save a bit more on the crankset by going with SISL2 but 165mm cranks are not available for that series. I wasl also considering using a Kalloy Uno stem but not sure if I trust a £20 stem to hold my £200 carbon handlebars!

Image
Kalloy UNO stem absolutely normal (102g without ti-bolts) :thumbup:

Jackofallgrades
Posts: 177
Joined: Tue Oct 08, 2019 10:15 am

by Jackofallgrades

What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Cannondale SSEvo3 'Atticus' - 7.2kg
...Work in Progress viewtopic.php?f=10&t=161634

User avatar
Dan Gerous
Posts: 2299
Joined: Sun Aug 12, 2007 6:28 pm

by Dan Gerous

Jackofallgrades wrote:
Sat Aug 15, 2020 12:52 pm
What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.

Beancouter
Posts: 895
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Dan Gerous wrote:
Jackofallgrades wrote:
Sat Aug 15, 2020 12:52 pm
What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.
I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile

Image
Image


Sent from my iPhone using Tapatalk

Jackofallgrades
Posts: 177
Joined: Tue Oct 08, 2019 10:15 am

by Jackofallgrades

:thumbup: Thanks guys
Cannondale SSEvo3 'Atticus' - 7.2kg
...Work in Progress viewtopic.php?f=10&t=161634

User avatar
LeDuke
Posts: 1902
Joined: Sun Oct 07, 2012 2:39 am
Location: Front Range, CO

by LeDuke

Beancouter wrote: I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile

Image
Image


Sent from my iPhone using Tapatalk
Who makes that cradle/yoke?


Sent from my iPhone using Tapatalk

Beancouter
Posts: 895
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .

Example yoke https://r2-bike.com/SCHMOLKE-Spare-Part ... O-Seatpost

https://www.ebay.co.uk/itm/292039170215

Total example (lots of options) from R2, less than 30g

Image


Sent from my iPhone using Tapatalk


lucianoz
Posts: 11
Joined: Thu May 07, 2015 2:38 pm

by lucianoz

Hi guys, i'm a old user, but i never post anything, but really like to read all the threads.
Can you help me with a doubt?
I bought last week a 2020 SSX Evo di2 womens bike for my wife, but she wont use the knot bar/stem combo, so i'll put her beloved regular round bars and stem.
So, my question is for those who bought the bicycle with the knot bar/stem combo (or anyone who knows about the parts): Does the k28000 part come with the top cap (the circuled green thing in the pictures below, becouse i really dont know how to call this in english lol)?? I mean, all the parts off the picures bellow come with the bike when is bought with the knot bar/stem?

Image
Image

Cheers guys

req110
Posts: 299
Joined: Thu Nov 22, 2018 10:23 am

by req110

Beancouter wrote:
Tue Aug 11, 2020 11:56 am
Wenne wrote:CANNONDALE SUPERSIX EVO INTERNAL SEAT BINDER, K26030
When does Cannondale make a new one ? mine is still making noise ...
I have been told there isn’t a new one.. that said, I have a replacement coming to me under warranty. I will check to see if there is any difference.

One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...Image


Sent from my iPhone using Tapatalk
I have removed the plate (which was rotated - bad) very easily there was something sticky, but not a tape, especially 3M. So i have built something like this and will give it a shot.
Attachments
Untitled.jpg

req110
Posts: 299
Joined: Thu Nov 22, 2018 10:23 am

by req110

Beancouter wrote:
Sun Aug 16, 2020 8:32 am
Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .
this one has negative review on ebay, they say it doesn't fit supersix, so i have canceled the order.

How about the one you have now? Where from it is, how does it look like on the bike and how much does it weight please?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



sohn
Posts: 5
Joined: Sat Jul 20, 2019 9:27 pm

by sohn

Anyone experiencing a creaky bottom bracket with the 2020 Supersix Evo? Mine just randomly developed a creak today... Any tips for solving it?

Post Reply