Are We Getting A New Cannondale Supersix?

[Prosper00]

Crazy deep for the bike. Love it!

[eins4eins]

Can anybody help with the bearing size of the lower headset bearing?

[mapaha2810]

Can anybody help with the bearing size of the lower headset bearing?

Which frame size and which year's model?

https://www.cannondalespares.com/Supers ... x-evo-2020

From 2020 onwards it's either 1 1/4 or 1 3/8, depending on the size of the frame

[eins4eins]

i guess its IS47 for the latest disc version in 54 then

[floriansantana]

The upper is a 41.8mm outer - 45°x45° - 1 1/8“ inner for all frame sizes I think.

The bottom bearing is a 1 3/8” for frame size 56 upwards and IS47 (1 1/4", 45° seat angle) for 54 downwards. The 1 3/8” is really hard to find. If you buy the full headset from Cannondale it’s like 80 euros, which is kind of steep if you only need two bearings.

[rides4beer]

Very nice bike!

Thanks!!

Crazy deep for the bike. Love it!

I thought there were a lil too deep at first, but I like 'em! They'll help me hold off the itch for an aero bike for a lil while.

[Wenne]

sure
https://www.youtube.com/c/LuescherTeknik/community

Thanks, that's the one tab I didn't click on his YouTube!

[matcav]

Did you get the part from Luescher, or did you print/make it yourself?
I'm very interested. I have a SSevo MY2020 (but no damage). I've got in touch with Cannondale through LBS and they told me they will send "a plate" to install in the head tube to fix it. However, I'd rather prefer the Luescher solution.

[Wenne]

-

[Wenne]

Did you get the part from Luescher, or did you print/make it yourself?
I'm very interested. I have a SSevo MY2020 (but no damage). I've got in touch with Cannondale through LBS and they told me they will send "a plate" to install in the head tube to fix it. However, I'd rather prefer the Luescher solution.

order the cad drawing from luescher and then order the part from him:
https://i.materialise.com/de
but i live in europe!

[matcav]

Did you get the part from Luescher, or did you print/make it yourself?
I'm very interested. I have a SSevo MY2020 (but no damage). I've got in touch with Cannondale through LBS and they told me they will send "a plate" to install in the head tube to fix it. However, I'd rather prefer the Luescher solution.

order the cad drawing from luescher and then order the part from him:
https://i.materialise.com/de
but i live in europe!

I live in EU as well.
Did you install it yourself? Luescher says it's not trivial.

[Wenne]

Did you get the part from Luescher, or did you print/make it yourself?
I'm very interested. I have a SSevo MY2020 (but no damage). I've got in touch with Cannondale through LBS and they told me they will send "a plate" to install in the head tube to fix it. However, I'd rather prefer the Luescher solution.

order the cad drawing from luescher and then order the part from him:
https://i.materialise.com/de
but i live in europe!

I live in EU as well.
Did you install it yourself? Luescher says it's not trivial.

installed it myself. material is titanium, I used this glue:
https://www.beko-group.de/produkte/maxb ... cher_id675

[Wenne]

Did you get the part from Luescher, or did you print/make it yourself?
I'm very interested. I have a SSevo MY2020 (but no damage). I've got in touch with Cannondale through LBS and they told me they will send "a plate" to install in the head tube to fix it. However, I'd rather prefer the Luescher solution.

order the cad drawing from luescher and then order the part from him:
https://i.materialise.com/de
but i live in europe!

I live in EU as well.
Did you install it yourself? Luescher says it's not trivial.

installed it myself. material is titanium, I used this glue:
https://www.beko-group.de/produkte/maxb ... cher_id675

but expensive, 15 € the CAD drawing and 96 € the part ...

[Maddie]

Considering the costs it can save when you actually need this part, I would say this is quite cheap.

[PUNlSHER]

Hi all
Want to install red 22 cranks with integrated spider on caad13.
DS - nothing, NDS - Wave Washer & 3 ±2 0.5 mm shims, I'm correct??

ps. It's 1.5mm overall or I need 2,5mm shims? Thank you..