Are We Getting A New Cannondale Supersix?

[BigBoyND]

Get the yoeleo hadle bar, its around 310 grams

The farsports is 400grams now

The Bontrager bar is 280g and cabling integrates perfectly with the SS, same way as the stock bar, without adapters that add weight/stack height as Farsports does.

[req110]

134g. That's how light you can make your knot seatpost.


Sent from my iPhone using Tapatalk

[card0s]

134g. That's how light you can make your knot seatpost.


Sent from my iPhone using Tapatalk

Did you cut the seatpost?

[req110]

Not at all.

[card0s]

That is a pretty good weight!

[Mcdeez]

@BigBoyND Yeah but its like twice the price aha

[RDY]

Sorry, I do have the heavy Knot stem and the presumably heavy SAVE handlebar.

I had assumed that you have to use Cannondale's proprietary Carbon seatpost that came with the bike (the Knot 27SL). If not, that would open up some possibilities.

Was looking at a cost to gram upgrades. Place to start is probably the cockpit. People tend to go with the Farsports F1? Rotors and tires are the next cheapest.

Get the yoeleo hadle bar, its around 310 grams

The farsports is 400grams now

400?? That's a pretty massive unannounced increase in weight ...

[Vivo66]

My Knot seatpost is 114g trimmed w/ yokes but not a bad weight anyway.

[req110]

wow, how much you trimmed?

[Vivo66]

Not that much. Here's a photo of my rear end. Any excuse ha

[Mcdeez]

Sorry, I do have the heavy Knot stem and the presumably heavy SAVE handlebar.

I had assumed that you have to use Cannondale's proprietary Carbon seatpost that came with the bike (the Knot 27SL). If not, that would open up some possibilities.

Was looking at a cost to gram upgrades. Place to start is probably the cockpit. People tend to go with the Farsports F1? Rotors and tires are the next cheapest.

Get the yoeleo hadle bar, its around 310 grams

The farsports is 400grams now

400?? That's a pretty massive unannounced increase in weight ...

Look in the farsports handle bar thread

[req110]

And what tuning parts you have on the seatpost?

[Vivo66]

I found them in my box of bike bits, I think they originally came off a Hylix carbon seatpost from years ago. Bolts are Ti, smaller diameter than the original ones that came with seatpost. cup bit is alloy but very small and only weighs 10g

[Stewche]

Interested in the EF hi mod. Could somebody tell me if the Rapha sticker can be removed? Seen photos without it so presume it is removable?

[Dan Gerous]

Interested in the EF hi mod. Could somebody tell me if the Rapha sticker can be removed? Seen photos without it so presume it is removable?

Yes it is removable.