Are We Getting A New Cannondale Supersix?

Discuss light weight issues concerning road bikes & parts.
User avatar
Dan Gerous
Posts: 1160
Joined: Sun Aug 12, 2007 6:28 pm

by Dan Gerous

Custom painted, built by Stage21, looks pretty nice:

Image

Wenne
Posts: 21
Joined: Tue Oct 01, 2019 6:54 pm

by Wenne

F2184A67-4FCB-4DB2-8C0D-A7876B7510CE.jpeg
:welcome:

by Weenie


S6ED
Posts: 127
Joined: Sun Jun 30, 2019 1:22 pm

by S6ED

Dan Gerous wrote:
Tue Oct 15, 2019 3:34 am
Custom painted, built by Stage21, looks pretty nice:
Nice but voiding the warranty is a no go for me.

Wenne
Posts: 21
Joined: Tue Oct 01, 2019 6:54 pm

by Wenne

FSA -12 :thumbup:
53967106-D0D4-44A9-8095-F49F8BCBDD3C.jpeg
7D1331E3-D53D-4F99-9740-B2CF754148BD.jpeg

brearley
Posts: 366
Joined: Mon Aug 11, 2008 10:08 pm
Location: Hull

by brearley

Is there a lighter solution to pf30a bottom bracket than the token ninja setup?
As they all seem to screw together I'm thinking none are going to be sub 100g and I'd consider full ceramic replacements to the bearings to drop weight further

hernejj
Posts: 21
Joined: Tue Sep 17, 2019 6:27 pm

by hernejj

brearley wrote:
Tue Oct 15, 2019 10:49 pm
Is there a lighter solution to pf30a bottom bracket than the token ninja setup?
As they all seem to screw together I'm thinking none are going to be sub 100g and I'd consider full ceramic replacements to the bearings to drop weight further
I guess it depends on what cranks you're planning on using. But here are the ones I know about:
https://wheelsmfg.com/bottom-brackets/c ... pf30a.html
https://www.c-bear.com/en/products/pf30a
https://www.bbinfinite.com/products/osb ... 9864585539

N1720
Posts: 1
Joined: Mon Jun 10, 2019 10:22 am

by N1720

@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?

User avatar
Dan Gerous
Posts: 1160
Joined: Sun Aug 12, 2007 6:28 pm

by Dan Gerous

Aren't the stock Cannondale alloy PF30 cups much lighter than all these? I never had any issues with them.

Image

Wenne
Posts: 21
Joined: Tue Oct 01, 2019 6:54 pm

by Wenne

N1720 wrote:
Wed Oct 16, 2019 6:02 pm
@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?
full-length housing for the shift cables ! 8,1 kg...

Wenne
Posts: 21
Joined: Tue Oct 01, 2019 6:54 pm

by Wenne

5CF397EE-29CE-4553-BD9A-4BF19BB4CE96.jpeg
N1720 wrote:
Wed Oct 16, 2019 6:02 pm
@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?
shifting quality good...
bike size 54 with body size 170 :noidea:

S6ED
Posts: 127
Joined: Sun Jun 30, 2019 1:22 pm

by S6ED

Dan Gerous wrote:
Wed Oct 16, 2019 6:06 pm
Aren't the stock Cannondale alloy PF30 cups much lighter than all these? I never had any issues with them.

Image
This must indeed be the lightest option. The stock aluminium cups are very light, my bike (Evo2) came with these plus a plastic FSA sleeve (10g or so) between them that insulates the BB axle from the elements. The plastic sleeve can be removed, if one so wishes, but its good to keep it as it keeps the whole BB assembly clean and dry.

S6ED
Posts: 127
Joined: Sun Jun 30, 2019 1:22 pm

by S6ED

...

User avatar
alexneumuller
Posts: 184
Joined: Thu May 21, 2009 10:45 am
Location: Munich, Germany

by alexneumuller

Back from the Painter. Frame weight is 830grs after repaint in a size 56

Image
C36 wrote:
alexneumuller wrote:The frame was without fork es 870gr with two small pieces of card board and some clear protector wrapping g. So probably around 850gr.

Will weigh frame and fork when I get it back.
Painted or raw frame before painting it?

I saw it in fatcreation Instagram, really nive


Sent from my iPhone using Tapatalk


Envoyé de mon iPhone en utilisant Tapatalk[/quote]



Sent from my iPhone using Tapatalk
--
IF Crown Jewel TI
Open New UP
Stinner Ti
Speedvagen
Parlee Z-Zero Disc
Cannondale System Six
Cielo Road Racer
Cervelo P5 Disc
English Cycles 10th Anniv Edition
Cannondale Super Six Evo Disc

User avatar
alexneumuller
Posts: 184
Joined: Thu May 21, 2009 10:45 am
Location: Munich, Germany

by alexneumuller

One piece BB would work. The piece inside is the rubber tube

ImageImage
alexneumuller wrote:Will check and take picture when the frame is back with me. Should be Thursday or Friday
TiCass wrote:Can we get more detail from the bottom bracket area, is the opening completely free from obtrusion? Can we put a one-piece bottom bracket in that?


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
--
IF Crown Jewel TI
Open New UP
Stinner Ti
Speedvagen
Parlee Z-Zero Disc
Cannondale System Six
Cielo Road Racer
Cervelo P5 Disc
English Cycles 10th Anniv Edition
Cannondale Super Six Evo Disc

by Weenie


Wenne
Posts: 21
Joined: Tue Oct 01, 2019 6:54 pm

by Wenne

Devotional wrote:
Sat Aug 10, 2019 4:13 pm
Still waiting on my ship to get a 51 and a 54 in to try . I’m wondering what a 54 with a saddle height of 69.5cm from bb will look like . I’m 5ft 8 . The shop had a caad13 in 51 in . Guy told me I’d be a 54 but I’m not so sure
Frame 54 , 69,5cm from bb...
Attachments
A02613A0-3A32-4D4C-A7E0-552EA470516B.jpeg

Post Reply
  • Similar Topics
    Replies
    Views
    Last post