Bura SL Seat Clamp/Wedge

[rugbymad76]

Hi all

Bit of assistance and advice needed on sourcing a replacement or alternative seat clamp/wedge for a Neil Pryde Bura SL 2017 frame.
Im needing to replace my missing part.

I believe Neil Prdye are no longer around unless im wrong? Does anyone know if any alternative brand spares could fit?

Thanks

[AndreLM]

You need a 30.7mm clamp. I got this one from KCNC... Works great.

https://fairwheelbikes.com/kcnc-sc9-seatpost-collar/

Enviado de meu SM-G950F usando o Tapatalk

[darnellrm]

You actually need a 30.0 clamp. The normal 30.7-30.8 will probably not work.

I have 2 Bura SL's..... FWIW

[AndreLM]

KCNC SC9 30.7 in my 2013 BuraSL. Never had any issues since I mounted it back in 2014.

Enviado de meu SM-G950F usando o Tapatalk

[Tenlegs]

2017 Bura clamp/wedge

[rugbymad76]

Cheers for the info guys.

AndreLM and darnellrm, thanks for the suggestions much appreciated. Would I be right in assuming you both have an earlier model than mine with a "traditional" seatpost clamp rather than the wedge on the 2017 frame?

Tenlegs, thanks for uploading the photo, guess i could have thought of that and saved confusion over clamp/wedge. This is the same model as mine for ref.

Anyone any further info/advise on replacment or altertatives which could fit?

Thanks

[AndreLM]

Yep... Mine is a previous version... Didn't know they changed to an internal wedge type.

And it really looks like the brand is now gone. It might get difficult to source an original replacement.

One thing you could try is contact Chapter 2 Bikes and ask them if the expander for any of their current bikes is similar (Mike Pryde was the bike designer at NP before starting C2)

Enviado de meu SM-G950F usando o Tapatalk