Creak free drive train for my new SL6
Moderator: robbosmans
Hi all, just want to tap the wisdom for my latest project - an SWorks Tarmac SL6. I've been researching the solution to that dreaded creaking on the BB/crank interface - before I purchase the parts. Can you please help me to choose which solution will be creak-free perpetually:
1. Original Spez BB + 30mm spindle crank
2. Original Spez BB + adapter + Ultegra crank
3. CeramicSpeed/Praxis/Kogel/C-bear conversion BB + Ultegra crank
Thanks in advance!
1. Original Spez BB + 30mm spindle crank
2. Original Spez BB + adapter + Ultegra crank
3. CeramicSpeed/Praxis/Kogel/C-bear conversion BB + Ultegra crank
Thanks in advance!
I've got option 1 on my sl6.
I was creak free until yesterday, my bearings are wasted after 8000km.
I was creak free until yesterday, my bearings are wasted after 8000km.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 166
- Joined: Fri Feb 22, 2013 1:27 pm
Hambini https://www.hambini.com/bike-parts.html
Awesome and definitely won’t creak. I’ve got them installed on all my bikes now.
Awesome and definitely won’t creak. I’ve got them installed on all my bikes now.
The pf30 bb's Ive had:
praxis in carbon mtb frame creaked on every pedal stroke until I removed it and put ti anti seize on, then all silent
chris king in carbon road frame with ti anti seize from the start, silent
rotor in carbon mtb frame anti seize didnt help had to use loctite primer and 609 to stop creaking
kogel in a couple bikes, same as rotor loctite was the only way to stop creaking
praxis in carbon mtb frame creaked on every pedal stroke until I removed it and put ti anti seize on, then all silent
chris king in carbon road frame with ti anti seize from the start, silent
rotor in carbon mtb frame anti seize didnt help had to use loctite primer and 609 to stop creaking
kogel in a couple bikes, same as rotor loctite was the only way to stop creaking
I have not had creaking with Praxis and then cbear (I switched), but to be fair the sample size is small so far ( under 1000 miles ). Good luck, you’ll love the SL6.
Cannondale Supersixevo 4 (7.05 kg)
Retired: Chapter2, Tarmac SWorks SL6, Orbea, Dogma F8\F10, LOW, Wilier, Ridley Noah, Cervelo R3\R5\S2\Aspero, Time Fluidity, Lapierre Pulsium, Cyfac, Felt, Klein, Cannondale pre-CAAD aluminum
Retired: Chapter2, Tarmac SWorks SL6, Orbea, Dogma F8\F10, LOW, Wilier, Ridley Noah, Cervelo R3\R5\S2\Aspero, Time Fluidity, Lapierre Pulsium, Cyfac, Felt, Klein, Cannondale pre-CAAD aluminum
Wow! This looks awesome. Thanks @probertsqbe!probertsqbe wrote: ↑Wed Feb 13, 2019 3:12 pmHambini https://www.hambini.com/bike-parts.html
Awesome and definitely won’t creak. I’ve got them installed on all my bikes now.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com