Thin headset spacers to match Cannondale stem

Discuss light weight issues concerning road bikes & parts.
Forum rules
Post Reply
jencvo
Posts: 70
Joined: Thu Oct 18, 2018 12:01 pm

by jencvo on Sun Dec 30, 2018 1:33 am

Hi guys, I've got a bit of a weenie issue. Had some headset spacers laying around and used them for the new bike build. However, you can see it looks awful. Does anybody have any suggestions on what spacers to get that will match the thickness of the Cannondale stem? Every spacers I come across on the web look equally thick to what I have on right now. Thanks!
IMG_6031.JPG
Top

by Weenie on Sun Dec 30, 2018 1:33 am

Top
kode54
Posts: 1580
Joined: Tue May 23, 2006 9:39 pm

by kode54 on Sun Dec 30, 2018 1:46 am

Point 1 spacers from Toronto Cycles.
- Factor 02 Disc + DA9170 + Enve 4.5AR CK CL hubs
- Moots Vamoots Disc RSL Titanium + DA9170 + Enve 3.4AR CK CL hubs
- Parlee Altum + DA9150 + Enve SES 4.5 Ene carbon hubs
- Argonaut Spacebike 2.0 + DA9170 + Enve SES 5.6 DT Swiss 240 CL hubs
Top
NickJHP
Posts: 232
Joined: Wed Feb 14, 2018 2:22 am
Location: Canberra, Australia

by NickJHP on Sun Dec 30, 2018 8:03 am

Moots and Seven both make Ti headset spacers...
Top
jencvo
Posts: 70
Joined: Thu Oct 18, 2018 12:01 pm

by jencvo on Sun Dec 30, 2018 1:11 pm

NickJHP wrote: ↑
Sun Dec 30, 2018 8:03 am
 Moots and Seven both make Ti headset spacers...
Thank you both!
Top
User avatar
tommasini
Posts: 1347
Joined: Sun Nov 02, 2003 6:48 am
Location: Central USA
Contact:
Contact tommasini

by tommasini on Mon Dec 31, 2018 12:28 am

ive occasionally gone into several local shops and ask if I can dig around in their spare spacer bin.......at one of them I have found a few that were 33 to 34mm outer diameter - very trim appearance. Sorry but I have no idea what brand bike they may have come off of - except to note that the dealer I found these at is primarily a Giant and Felt dealer.
Last edited by tommasini on Thu Jan 31, 2019 1:55 am, edited 1 time in total.
Top

by Weenie on Mon Dec 31, 2018 12:28 am

Top
flying
Posts: 1814
Joined: Mon Dec 19, 2005 9:16 am

by flying on Tue Jan 29, 2019 4:14 am

Hi jencvo

Did you ever get this sorted?

I know the problem as I usually run the thinner spacers as they also line up with Kalloy stems

I think the diameter is 32mm like This Deda example shows
https://www.chainreactioncycles.com/us/ ... prod158496

But many these days are 34.4-35mm

I am also hunting for a few 5mm stack of these smaller spacers myself :D
Top
Post Reply

Return to “Road”

  • Similar Topics
    Replies
    Views
    Last post