Page 2 of 2

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Thu Mar 07, 2019 7:20 pm
by TobinHatesYou
The drawing suggests the aero extensions are attached at the stem and not the bars.

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Thu Mar 07, 2019 7:56 pm
by Stuartclark1977
Hopefully a set of clip ons are not ‘cycling’s most important change in 30 years’.

I’m hoping for something more!

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Thu Mar 07, 2019 7:56 pm
by Weenie

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Thu Mar 07, 2019 8:41 pm
by Fisherfreerider
TLN wrote:
Thu Mar 07, 2019 6:51 pm
PSTWW wrote:
Thu Mar 07, 2019 5:53 pm
This has been confirmed by a Trek Dealer and Trek Rep as a real thing. Not a new bike, but a new set of compatible TT Bars for the Madone Aerobar that are due for release in the Spring (April) 2019.
Yeah, and this gonna be a new bar, so you'll need to re-route all the cables, bleed brakes and etc.
I quite like idea on SystemSix: Vision bars were made with idea of extensions and have sockets, unlike tradition clip-ons. I'm not doint TT, but I'd take that route if ever decide to give it a try.
Not true.

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Mon Mar 11, 2019 4:51 pm
by PSTWW
Fisherfreerider wrote:
Thu Mar 07, 2019 8:41 pm
TLN wrote:
Thu Mar 07, 2019 6:51 pm
PSTWW wrote:
Thu Mar 07, 2019 5:53 pm
This has been confirmed by a Trek Dealer and Trek Rep as a real thing. Not a new bike, but a new set of compatible TT Bars for the Madone Aerobar that are due for release in the Spring (April) 2019.
Yeah, and this gonna be a new bar, so you'll need to re-route all the cables, bleed brakes and etc.
I quite like idea on SystemSix: Vision bars were made with idea of extensions and have sockets, unlike tradition clip-ons. I'm not doint TT, but I'd take that route if ever decide to give it a try.
Not true.
Which bit isn't true?

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Mon Mar 11, 2019 5:01 pm
by Fisherfreerider
The bit in bold.

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Mon Mar 11, 2019 8:29 pm
by PSTWW
Fisherfreerider wrote:
Mon Mar 11, 2019 5:01 pm
The bit in bold.
OK - thanks

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Fri Jun 21, 2019 12:35 pm
by PSTWW

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Sun Jul 21, 2019 11:04 am
by Fduathlon
15637033422701353281209.jpg

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Sun Jul 21, 2019 12:28 pm
by Sabrerider
Is there an upgrade kit available?

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Sun Jul 21, 2019 2:25 pm
by TobinHatesYou
Sabrerider wrote:
Sun Jul 21, 2019 12:28 pm
Is there an upgrade kit available?

Yes.

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Sun Sep 15, 2019 5:11 pm
by Noctiluxx
Just ordered the TT bar kit with a 15 degree face plate. Hopefully they introduce XXX-9 wheels sometime in 2020 as I would add an 80/90mm rear wheel to go with the XXX-6 in the front. I'll post some pics once its complete.

Re: 2019 Madone - will it ever be clip-ons compatible?

Posted: Sun Sep 15, 2019 6:25 pm
by PSTWW
Don't hang on for the tilted bracket/stem combi - been waiting since they was announced in the spring - I've ended up with the straight bracket & stem as I've been told the angled brackets/stem combi still failing tests and back in R&D. If you know different pls post.