Specialized aerofly 2 bar question ....
Moderator: robbosmans
-
- Posts: 571
- Joined: Sat Apr 24, 2010 7:31 pm
About to add these to a basket when it occurred to me, every image is of the bars shod on a disk brake bike. As such, anyone aware if the bars can be used with a caliper brake bike with cabling routing running out of the bar rather than on the Sworks stem which is again it seems engineered for the Venge and internal disk cabling etc etc. Thanks in advance.
Yes !! No problem.
I have this handlebar on my tarmac sl6 rim brake and no issue. I routed the brake and di2 cables inside and they go out next to the stem.
(Look this picutre on instagram )
https://www.instagram.com/p/BmoHQUxhuw0/
I have this handlebar on my tarmac sl6 rim brake and no issue. I routed the brake and di2 cables inside and they go out next to the stem.
(Look this picutre on instagram )
https://www.instagram.com/p/BmoHQUxhuw0/
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Hi r3m
Thanks for that picture.. I've been wanting another Handlebar for my sl6 disc.. Don't really like the stock bars. The bump at the top bend isn't for my hands... Does this bar have it?
Thinking lightweight or aero.. But cable routing is important too.
This looks really good on the cable routing front.. Will be interested even with a weight penalty on something like a darimo or 3t superergo Ltd.
Can you measure the part beside the stem and start of the flat section? Will need to fit an Oi bell.
Thanks
Sent from my Pixel 2 XL using Tapatalk
Thanks for that picture.. I've been wanting another Handlebar for my sl6 disc.. Don't really like the stock bars. The bump at the top bend isn't for my hands... Does this bar have it?
Thinking lightweight or aero.. But cable routing is important too.
This looks really good on the cable routing front.. Will be interested even with a weight penalty on something like a darimo or 3t superergo Ltd.
Can you measure the part beside the stem and start of the flat section? Will need to fit an Oi bell.
Thanks
Sent from my Pixel 2 XL using Tapatalk
I guess the top part of the bar (the aero part)
Road // 2023 S-Works Tarmac SL8 | Shimano Dura-Ace Di2 | Roval Rapide CLX
Gravel // 2023 Specialized Crux Pro | SRAM Force AXS | Roval Terra CL
Retired // 2022 S-Works Shiv TT // 2021 S-Works Tarmac SL7 // 2019 Specialized Allez Sprint Red Hook
Gravel // 2023 Specialized Crux Pro | SRAM Force AXS | Roval Terra CL
Retired // 2022 S-Works Shiv TT // 2021 S-Works Tarmac SL7 // 2019 Specialized Allez Sprint Red Hook
Ahh pictures solves the problem.. Lol
Thanks.. Need that 1cm area to be 1.5cm for the bell.
Yes, I'm in draconian must have bell or get fined by police land.
So with this bar.. Will need to but bar off centre.. Don't think my ocd can handle that.
Sent from my Pixel 2 XL using Tapatalk
Thanks.. Need that 1cm area to be 1.5cm for the bell.
Yes, I'm in draconian must have bell or get fined by police land.
So with this bar.. Will need to but bar off centre.. Don't think my ocd can handle that.
Sent from my Pixel 2 XL using Tapatalk
Easy solution is to sand/grind down the bell clamp strap so it's narrow enough to fit in the 1cm space. I had to do this on my computer mount using Aerofly bars as well. The computer mount was plastic so was very easy to take material off.
what country is so focussed on bells?
sychen wrote: ↑Thu Nov 08, 2018 10:09 pmAhh pictures solves the problem.. Lol
Thanks.. Need that 1cm area to be 1.5cm for the bell.
Yes, I'm in draconian must have bell or get fined by police land.
So with this bar.. Will need to but bar off centre.. Don't think my ocd can handle that.
Sent from my Pixel 2 XL using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 571
- Joined: Sat Apr 24, 2010 7:31 pm
Thanks for the image and reply. Ordered. Narrowed it down to these, Zipp SL anp Pro, but there is something lovely about the aerofly 2 in the flesh. Thanks !