Tight bottle cage mount thread

Discuss light weight issues concerning road bikes & parts.
Post Reply
wilwil
Posts: 365
Joined: Thu Sep 23, 2010 5:47 pm

by wilwil

One of the bottle cage mounts on my frame is so tight that I cant screw in by hand after a couple of turns. It also feels vey tight using a hex wrench. Should I just carry on tightening or take some other action? I have tried different bolts and some are better than others. The other three mounts in the frame are fine. The original bolts that came with the frame work ok but the heads are too deep on them so they rub on the bottle. I have tried cleaning the threads with acetone as well as using grease. Any ideas?

by Weenie


NiFTY
Posts: 1320
Joined: Sat May 26, 2012 11:26 pm

by NiFTY

Use a steel bolt and try and use it to recut the thread. There may be stuff stuck in there(like a stripped alloy thread) This happened to me.
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

HillClimbTom
Posts: 24
Joined: Thu Aug 16, 2018 7:10 pm

by HillClimbTom

Don’t mess about trying to wind anything in to the hole, it only going to end in tears and will be a lot more expensive to fix. Take the bike to your lbs or a local engineering shop and get them to run a tap down the thread. Job sorted!

ghisallo2003
Posts: 653
Joined: Mon Jan 02, 2006 7:10 pm

by ghisallo2003

Many bike shops are poor, and simply can not charge for the patience required to do a job properly.

If you are remotely comfortable mechanically, or have a team-mate who is (normally there is one guy who has exceptional skills) then it would be better to do this yourselves.

bremerradkurier
Posts: 325
Joined: Mon Jun 13, 2016 4:18 pm

by bremerradkurier

If you're in the US, this would be more than sufficient for chasing the threads.

https://www.harborfreight.com/40-pc-car ... 62832.html

Geoff
Posts: 5259
Joined: Sat Dec 13, 2003 2:25 am
Location: Canada

by Geoff

+1. I would also recommend using a proper tap to chase those threads. You don't want to mess them up.

User avatar
Calnago
Posts: 8526
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

Yup, and be super careful about getting it started as it sounds like the first two or three threads may already be crossthreaded. Don’t want to crossthread the rest of them.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post