Hi All
Thinking about buying a Cannondale Caad12 and strip the frame and fork.
I know that the fork shall be sanded down and finished off with satin clear coat.
However, I am more in doubt with the frame finish.
What are my options?
I know that the finish shall no be the finish as when I have used paint remover - and I know that the finish shall no be a mirror finish.
What are my options in between? I do like the look of titanium - however I don't think that I can obtain that finish?
In addition, what about the weld areas? Is it possible to have these to turn out nicely?
Thoughts, experiences and comments are more than welcome
Stripping a Cannondale Caad12 frame - advise needed
Moderator: robbosmans
- TarugoKing
- Posts: 60
- Joined: Thu Jul 21, 2016 3:47 pm
Have you checked this thread out? OP documented what he used to strip the frame and fork and so much more. Although he never had a finished product because of change of priorities, the thread is a good read.
https://weightweenies.starbike.com/foru ... 0#p1215236
https://weightweenies.starbike.com/foru ... 0#p1215236
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com