Stripping a Cannondale Caad12 frame - advise needed

Discuss light weight issues concerning road bikes & parts.
Post Reply
Champ5000
Posts: 82
Joined: Fri Apr 18, 2014 4:13 pm
Location: Denmark

by Champ5000

Hi All

Thinking about buying a Cannondale Caad12 and strip the frame and fork.

I know that the fork shall be sanded down and finished off with satin clear coat.

However, I am more in doubt with the frame finish.

What are my options?

I know that the finish shall no be the finish as when I have used paint remover - and I know that the finish shall no be a mirror finish.

What are my options in between? I do like the look of titanium - however I don't think that I can obtain that finish?

In addition, what about the weld areas? Is it possible to have these to turn out nicely?

Thoughts, experiences and comments are more than welcome :D

User avatar
TarugoKing
Posts: 60
Joined: Thu Jul 21, 2016 3:47 pm

by TarugoKing

Have you checked this thread out? OP documented what he used to strip the frame and fork and so much more. Although he never had a finished product because of change of priorities, the thread is a good read.

https://weightweenies.starbike.com/foru ... 0#p1215236

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post