Campag 11speed

[WorkonSunday]

Hi all,

I'm building up a new bike (out of second hand parts mostly) but now having to decide which groupset to use. This will be a rim brake Colnago on a budget.

I have got myself a set of Rotor Aldhu crankset already, but trying to think if i can should go cheap and get the 11speed Centaur or fork up abit more and get the 2018 Potenza HO. I will be using a centaur 11-29 with rotor round (non-Q) 52/36 and Record chain, so realistically we are talking only about shifters, front mech and rear mech.

in the UK the shifters are only 10GBP difference; same as front mech. rear mech is more than doubled tho. Since Potenza doesnt get any carbon anyway, may be im better off with Centaur?

My experience is mostly with Shimano. I have R9000, R8000, 6800, 5800 and various mix and match, i always found rear mech and front mech don't make too much difference, hence spend the money on shifters and cabling are better bang for bucks. But i dont think i can do the same with Campag lower end groupset. so is it a marked difference going Potenza? Thanks.

[ghisallo2003]

10 Speed Record.

[alistaird]

10 Speed Record.

But how well will this work with an 11 speed chainset?

A

Sent from my Pixel 2 XL using Tapatalk

[jih]

10 Speed Record.

But how well will this work with an 11 speed chainset?

A

Sent from my Pixel 2 XL using Tapatalk

With an 11s chain it would be fine.

[WorkonSunday]

thanks for the replies guys.

10 speed will work with the chainset but i already have a 11-29 11 speed casstte, i would like to stick with 11 speed. Thanks.

[joeyb1000]

Potenza