Campy —> eTap conversion

Discuss light weight issues concerning road bikes & parts.
Post Reply
wintershade
Posts: 228
Joined: Mon Apr 16, 2018 7:12 pm
Location: San Francisco, CA

by wintershade

I have a Canyon Ultimate SLX 9 Pro, which is Campy Record 11 mechanical and has an Ultra-Torque BB.

If, hypothetically, I wanted to convert the bike to eTap and run a SRAM Red crank, is this possible? Can the BB on this bike be swapped to GXP without using some kind of creaky adapters?

Boshk
Posts: 328
Joined: Wed Jul 19, 2017 2:59 am

by Boshk

You or LBS will have to take the Ultra-Torque cups out and replace it with SRAM's standard gxp for bb86 which is like $30usd.
Colnago C60

by Weenie


bremerradkurier
Posts: 305
Joined: Mon Jun 13, 2016 4:18 pm

by bremerradkurier

You'd lose the brake tension release functionality with E-tap levers and Campy rim calipers.

wintershade
Posts: 228
Joined: Mon Apr 16, 2018 7:12 pm
Location: San Francisco, CA

by wintershade

Thanks. So in other words, very do-able? No need to buy a new bike with SRAM already on it?

My plan would be to strip the bike down to bare frame and rebuild from ground up, and then use the Record stuff for a different bike.

ohjinguh9
Posts: 30
Joined: Thu Jun 28, 2018 8:41 pm

by ohjinguh9

Totally do-able. If you have the tools, easy to do at home. If not, def take to a reputable shop

by Weenie


robertbb
Posts: 859
Joined: Thu Jul 23, 2009 3:35 am
Location: Melbourne, Australia

by robertbb

Run the Campy crank!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post