Pc7 vs Sigma speed sensor

[haiminhco]

Im trying to pair an Srm Pc7 with an Ant+ Sigma speed sensor but I couldnt find it.
I tried to pair by searching for it with the Pc7 first, then I tried with the software; they even ask for the serial number and I tried to put it in automatic but Im not sure how exactly it works..?

Thanks in advance for any help!

[ms6073]

Have you tried a fresh battery in the speed sensor? Also, what about magnet alignment? My suggestion would be to replace the battery then 'wake' up the sensor by passing a magnet over the specified area then try to pair the sensor.

[sungod]

i've used pc7/pc8 with various speed sensors, as long as the sensor uses the 'spd' profile it should work, and the ant directory suggest your sensor should be ok
https://www.thisisant.com/directory/sig ... ansmitter/

have you put the pc7 in the correct mode? it needs to be set for ant+ speed sensor (speed sensor pairing display shows 'plus', not 'suunto'), the srm pc7 manual shows the process

[ParisCarbon]

Did you select the Pairing mode to "Plus" when you tried to pair it? This will enable the ANT+ pairing.
https://www.youtube.com/watch?v=oo1n4dUvCao

[micky]

I tried years ago and couldn't make it work.
I still have that Sigma speed sensor here.
Please let me know if you're able to make it work!

[sungod]

if the sigma isn't working, i've used the vdo z-sender with pc7 https://www.thisisant.com/directory/ant ... r-z-sender not sure these are still available

the garmin hub mounted ones work fine with pc8, shoud be ok with pc7 too https://www.thisisant.com/directory/bike-speed-sensor1/ they are widely available