Campy SRM vs P2M on BB area!

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
avispa
Posts: 262
Joined: Tue Mar 11, 2008 2:36 am

by avispa

I need your assistance if you have/have had and Campy SRM and Power 2 Max Power Meters... I got a hold of a 4-bolt campagnolo 54X42 rings, and installed them on my SRM power meter. I found out that the combination of frame use (a Pinarello F8) and the SRM Power Meter is not a good mix. Any inner ring larger than 40T will rub against the drive side chain stay. I tested this setup on my older Pinarello 65.1 and there is plenty of clearance... The F8 seems to have been built way to tight in the BB/Chain stay area. Although, I am aware that the SRM Campy Power Meters can be a problem because the warp around the BB cups a lot!

Thanks!

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply