S-Works Venge 2019

Discuss light weight issues concerning road bikes & parts.
sthompson
Posts: 26
Joined: Fri Apr 06, 2018 12:23 am
Location: California

by sthompson

endershan wrote:
Thu Jul 12, 2018 9:28 am
sthompson wrote:
Thu Jul 12, 2018 3:54 am
Hey everyone,

I work at Specialized and am the PM for the Venge. I'm a long time lurker, first time poster...Anyway, I will do my best to be available on here for a while and answer specific questions about the Venge if you have any.

-Stewart
1. On your site there is stem in the spec and geometry section of Venge frameset. Does the frameset come with a stem?
2. Is the direct mount rear derailleur hanger included in the frameset, or do i have to purchase separately?
3. Is a routing instruction available? Junction box under saddle is new for my LBS.
1. Yes, the stem comes with the framesets in the size noted on the geo chart. (Handlebars do not come with the frame.)
2. The direct mount hanger is available as a service part and doesn't come with the bikes this year. The part # for that is S182600003.
3. Yes, routing instructions are in the owner's manual that comes with the bikes/frames (excerpt below).
Attachments
fig1.JPG
fig2.JPG

sthompson
Posts: 26
Joined: Fri Apr 06, 2018 12:23 am
Location: California

by sthompson

ParisCarbon wrote:
Thu Jul 12, 2018 12:58 pm
Stewart, thanks for answering.. so why no Sagan 58 for Canada... 52,54,56.. I went through this exact same disaster when trying to get a 58 rim brake SL6, and I eventually ordered it through a close US shop and took a drive... Canada told me they sold out immediately of 58 tarmacs, so that goes to show there is market, but no Sagan 58s were made available for Canada... Lke I said...here I sit with $6700 burning a hole in my pocket, but I cant get one unless I order across the border and pay $1500 more than Cdn retail?? Sorry for the rant, its frustrating...
Ya, I understand it's super frustrating, and I'm sorry.
For this one, it mostly came down to timing of the 58cm frames being available for mass production and timing of the Sagan collection frames being painted and produced overall. I think we only made 10 pcs of the 58cm Sagan frame and none of the 61cm. Those 10 were divided between the USA and Europe as they had the largest allocation of the Sagan frames to start with.

by Weenie


sthompson
Posts: 26
Joined: Fri Apr 06, 2018 12:23 am
Location: California

by sthompson

danridesbikes wrote:
Tue Jul 10, 2018 9:05 pm
anyone know the part numbers for the 110mm and 120mm stems and the availability of those?

thanks
Here are the part #s for all the stems, posts, and Aerofly II bars. They will all be aftermarket items and visible on the website (soon I hope). 6 degree stems will be in stock around the first week of August and 12 degree stems are about a month behind that.

6 degree Venge stems:
  • 20019-1601 SW VENGE STEM BLK 31.8X80 6D
    20019-1602 SW VENGE STEM BLK 31.8X90 6D
    20019-1603 SW VENGE STEM BLK 31.8X100 6D
    20019-1604 SW VENGE STEM BLK 31.8X110 6D
    20019-1605 SW VENGE STEM BLK 31.8X120 6D
    20019-1606 SW VENGE STEM BLK 31.8X130 6D
    20019-1607 SW VENGE STEM BLK 31.8X140 6D
12 degree Venge stems:
  • 20019-1614 SW VENGE STEM BLK 31.8X110 12D
    20019-1615 SW VENGE STEM BLK 31.8X120 12D
    20019-1616 SW VENGE STEM BLK 31.8X130 12D
    20019-1617 SW VENGE STEM BLK 31.8X140 12D
Venge seatposts:
  • 28119-3300 Sw Venge Carbon Post 300mm 0 Offset
    28119-3302 Sw Venge Carbon Post 300mm 20 Offset
    28119-3310 Sw Venge Carbon Post 390mm 0 Offset
    28119-3312 Sw Venge Carbon Post 390mm 20 Offset
S-Works Aerofly II Handlebars:
  • 21019-0138 Sw Carbon Aerofly Ii Rd Bar Blk/Char 31.8x38
    21019-0140 Sw Carbon Aerofly Ii Rd Bar Blk/Char 31.8x40
    21019-0142 Sw Carbon Aerofly Ii Rd Bar Blk/Char 31.8x42
    21019-0144 Sw Carbon Aerofly Ii Rd Bar Blk/Char 31.8x44

davidodem
Posts: 16
Joined: Mon Jul 09, 2018 10:21 pm
Location: Miami Florida

by davidodem

sthompson wrote:
Thu Jul 12, 2018 3:54 am
Hey everyone,

I work at Specialized and am the PM for the Venge. I'm a long time lurker, first time poster...Anyway, I will do my best to be available on here for a while and answer specific questions about the Venge if you have any.

-Stewart
Will there be more of the Sagan Venge made in the future? Or is this a limited run?

dvq
Posts: 157
Joined: Mon Sep 25, 2017 1:36 pm

by dvq

sthompson wrote:
Thu Jul 12, 2018 2:55 pm
Kermithimself wrote:
Thu Jul 12, 2018 8:51 am
sthompson wrote:
Thu Jul 12, 2018 3:54 am
Hey everyone,

I work at Specialized and am the PM for the Venge. I'm a long time lurker, first time poster...Anyway, I will do my best to be available on here for a while and answer specific questions about the Venge if you have any.

-Stewart
Will there eventually be a rim brake version of the new Venge?
Nope!
Glad to hear it!

sun
Posts: 91
Joined: Fri Dec 23, 2011 9:26 am

by sun

Are the stems Venge specific? Do they come with the Garmin mount, or do they need to be purchased separately?

ichobi
Posts: 910
Joined: Thu Jan 19, 2012 11:30 pm

by ichobi

sthompson wrote:
Thu Jul 12, 2018 3:27 pm

Here are the part #s for all the stems, posts, and Aerofly II bars. They will all be aftermarket items and visible on the website (soon I hope). 6 degree stems will be in stock around the first week of August and 12 degree stems are about a month behind that.

Will the venge stem fits fine with Tarmac SL6? Really like the cockpit combo.

sthompson
Posts: 26
Joined: Fri Apr 06, 2018 12:23 am
Location: California

by sthompson

sun wrote:
Thu Jul 12, 2018 4:25 pm
Are the stems Venge specific? Do they come with the Garmin mount, or do they need to be purchased separately?
I'm not 100% sure what you mean by specific. The stem is compatible with any 31.8mm handlebar but the cable routing and spacer integration is specific to the Venge frame.

The accessory mount comes with every bike/frameset and is also available as a spare part. Btw, the mount uses the Barfly Prime interface and includes discs for Garmin, Wahoo, Bryton, Polar, Lezyne, Magellan, Sigma, and Cateye computers. We also include attachments for GoPro and lights.

sthompson
Posts: 26
Joined: Fri Apr 06, 2018 12:23 am
Location: California

by sthompson

ichobi wrote:
Thu Jul 12, 2018 4:45 pm
sthompson wrote:
Thu Jul 12, 2018 3:27 pm

Here are the part #s for all the stems, posts, and Aerofly II bars. They will all be aftermarket items and visible on the website (soon I hope). 6 degree stems will be in stock around the first week of August and 12 degree stems are about a month behind that.

Will the venge stem fits fine with Tarmac SL6? Really like the cockpit combo.
Technically, it does fit on the Tarmac but the integration won't be nearly as clean as on the Venge.
Another option is to just use the Aerofly II bars with whatever "regular" stem you have on the Tarmac too.

r3m
Posts: 45
Joined: Thu Mar 29, 2018 3:57 pm

by r3m

The Aerofly II is avaiable in France. Ordered today for my tarmac sl6. Anyone know which garmin mount choose?

leej88
Posts: 341
Joined: Mon Apr 05, 2010 4:22 am

by leej88

@sthompson

I'm 183cm tall but I'm a little more legs than torso so my saddle height (BB to top of saddle) is 809mm.

Size 56 looks about right but will the 390mm 0 offset seatpost be able to reach 809mm? Or do I have to go a size up?

User avatar
taodemon
Posts: 96
Joined: Tue Aug 29, 2017 2:04 pm
Location: Massachusetts

by taodemon

sthompson wrote:
Thu Jul 12, 2018 4:57 pm
Technically, it does fit on the Tarmac but the integration won't be nearly as clean as on the Venge.
Another option is to just use the Aerofly II bars with whatever "regular" stem you have on the Tarmac too.
Other than the recessed area for the tape and textured flat portion of the bar is there much difference between the original Aerofly and the Aerofly II? As in weight or aero time savings?

ParisCarbon
Posts: 1373
Joined: Mon Feb 05, 2007 5:39 am
Location: Winnipeg Canada

by ParisCarbon

leej88 wrote:
Thu Jul 12, 2018 5:30 pm
@sthompson

I'm 183cm tall but I'm a little more legs than torso so my saddle height (BB to top of saddle) is 809mm.

Size 56 looks about right but will the 390mm 0 offset seatpost be able to reach 809mm? Or do I have to go a size up?
Im same height as you and run my saddle a hair over 81.. Im riding my Tarmacs (2016 and 18) in a 58.... my inseam is 92.7 just for reference...

ParisCarbon
Posts: 1373
Joined: Mon Feb 05, 2007 5:39 am
Location: Winnipeg Canada

by ParisCarbon

ParisCarbon wrote:
Thu Jul 12, 2018 5:51 pm
leej88 wrote:
Thu Jul 12, 2018 5:30 pm
@sthompson

I'm 183cm tall but I'm a little more legs than torso so my saddle height (BB to top of saddle) is 809mm.

Size 56 looks about right but will the 390mm 0 offset seatpost be able to reach 809mm? Or do I have to go a size up?
Im same height as you and run my saddle a hair over 81.. Im riding my Tarmacs (2016 and 18) in a 58.... my inseam is 92.7 just for reference... was planning the venge in a 58 as well.. theres considerable difference in the headtube / stack beween the 2 models... almost 3cm

by Weenie


sthompson
Posts: 26
Joined: Fri Apr 06, 2018 12:23 am
Location: California

by sthompson

leej88 wrote:
Thu Jul 12, 2018 5:30 pm
@sthompson

I'm 183cm tall but I'm a little more legs than torso so my saddle height (BB to top of saddle) is 809mm.

Size 56 looks about right but will the 390mm 0 offset seatpost be able to reach 809mm? Or do I have to go a size up?
Yep, plenty of length in the 390mm post on the 56cm frame! You should be able to get over 850mm saddle height on the 56cm just fine (the ST is a bit longer than the previous Venge and SL6).

Post Reply
  • Similar Topics
    Replies
    Views
    Last post