Page 103 of 117

Re: S-Works Venge 2019

Posted: Sat May 11, 2019 10:48 am
by robeambro
Hi guys, sorry if it’s a repetitive question but here goes: what Wahoo mount are you using on your Aerofly handlebars?

I bought a Precotec mount but the bolt snapped at 5nm and I’m not quite sure I want to use it even if they send a replacement bolt.

Edit: I should mention I have a Tarmac, so no Venge stem

Re: S-Works Venge 2019

Posted: Sat May 11, 2019 10:48 am
by Weenie

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 3:24 pm
by MNX1024
The new bike!

Weight is exactly 15.5lbs/7.03kg with pedals.

Will take better photos later. So, please bare with the bike shop shot.

Can't wait until I can ride it!

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 3:29 pm
by Stendhal
MNX1024 wrote:
Tue May 14, 2019 3:24 pm
The new bike!

Weight is exactly 15.5lbs/7.03kg with pedals.

Will take better photos later. So, please bare with the bike shop shot.

Can't wait until I can ride it!
:up: for that analog scale.

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 3:48 pm
by MNX1024
Now I just gotta figure out ways to lighten the sucker up. Any suggestions people?

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 4:23 pm
by jlok
LW Tubular Wheels
140 Rotors
XPro 15 Pedals
Any Light Bartape

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 4:30 pm
by spdntrxi
MNX1024 wrote:
Tue May 14, 2019 3:24 pm
The new bike!

Weight is exactly 15.5lbs/7.03kg with pedals.

Will take better photos later. So, please bare with the bike shop shot.

Can't wait until I can ride it!
nice... cages and a mount wont add much.. I'm at 7.4kg with my BMCTM01R...

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 5:03 pm
by MNX1024
Out of curiosity, anyone knows if it would be lighter if I rebuild my wheels with CX-Ray spokes?
jlok wrote:
Tue May 14, 2019 4:23 pm
LW Tubular Wheels
140 Rotors
XPro 15 Pedals
Any Light Bartape
Definitely looking at 140mm Rotors, any suggestions on what to get that would work with the SRAM AXS shifters?

I'll change out the bartape later, too lazy to deal with that.

Pedal and tubular wheels will not be in the radar.
spdntrxi wrote:
Tue May 14, 2019 4:30 pm

nice... cages and a mount wont add much.. I'm at 7.4kg with my BMCTM01R...
Not too worried about the cages. Kind of forgotten to bring it to the shop to have them throw it on. Also realized I forgot to ask for a water bottle.... Guess I would be riding without a bottle this Thursday.... Long story short, due to my bizarre situation, I actually do not have any bottles right now...

It's not noticeable on the pictures, but a mount is already on it.

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 5:24 pm
by CAAD8FRED
Double Post

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 5:26 pm
by CAAD8FRED
MNX1024 wrote:
Tue May 14, 2019 3:24 pm
The new bike!

Weight is exactly 15.5lbs/7.03kg with pedals.

Will take better photos later. So, please bare with the bike shop shot.

Can't wait until I can ride it!
Venge Pro upgraded to Red, any other upgrades? What size? That’s very light

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 5:27 pm
by TobinHatesYou
MNX1024 wrote:
Tue May 14, 2019 3:24 pm
The new bike!

Weight is exactly 15.5lbs/7.03kg with pedals.

Will take better photos later. So, please bare with the bike shop shot.

Can't wait until I can ride it!

Don’t tell Lewn777. He’ll say you’re lying and a disc aero bike can just barely make 7.5kg.

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 5:27 pm
by jlok

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 6:26 pm
by MNX1024
CAAD8FRED wrote:
Tue May 14, 2019 5:26 pm

Venge Pro upgraded to Red, any other upgrades? What size? That’s very light
That's a size 52. Only thing I did was upgrading to Red and a Berk Lupina. Both the Pro and S-Works are the same frame anyway, Didn't like the colors on the S-Works, went with the Pro frameset instead.
TobinHatesYou wrote:
Tue May 14, 2019 5:27 pm

Don’t tell Lewn777. He’ll say you’re lying and a disc aero bike can just barely make 7.5kg.
Don't know who this person is, but there's a pic with the scale. :D
jlok wrote:
Tue May 14, 2019 5:27 pm
https://absoluteblack.cc/raven-sl-95g.html
ask them for the 140
Thanks, I'll look into it. The weight save would probably balance out the weight gain for a potential new wheel set I'm getting.

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 7:39 pm
by Hexsense
MNX1024 wrote:
Tue May 14, 2019 5:03 pm
jlok wrote:
Tue May 14, 2019 4:23 pm
LW Tubular Wheels
140 Rotors
XPro 15 Pedals
Any Light Bartape
Definitely looking at 140mm Rotors, any suggestions on what to get that would work with the SRAM AXS shifters?
Shimano XTR RT-MT900 rotors. 89g for 140mm size. Unlike Dura-ace and Ultegra version. Their braking area are large and won't cause weird pulsing with non Shimano calipers.

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 10:17 pm
by RussellS
MNX1024 wrote:
Tue May 14, 2019 3:48 pm
Now I just gotta figure out ways to lighten the sucker up. Any suggestions people?
Tires. Tubes. Custom wheels such as carbon clincher Enve rims and Extralite hubs. The stock Roval wheels are not the lightest. You could easily save quarter to half Pound of weight with custom built "expensive" wheels over the factory Roval.

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 10:17 pm
by Weenie

Re: S-Works Venge 2019

Posted: Tue May 14, 2019 10:23 pm
by spdntrxi
RussellS wrote:
Tue May 14, 2019 10:17 pm
MNX1024 wrote:
Tue May 14, 2019 3:48 pm
Now I just gotta figure out ways to lighten the sucker up. Any suggestions people?
Tires. Tubes. Custom wheels such as carbon clincher Enve rims and Extralite hubs. The stock Roval wheels are not the lightest. You could easily save quarter to half Pound of weight with custom built "expensive" wheels over the factory Roval.
Pretty sure my Roval CLX50's are lighter then both my Enve 5.6 and Enve4.5AR..your recommendation indeed would be $$$$..as I used those in the rim brake days of old