S-Works Venge 2019
Moderator: robbosmans
Hi, I have a question. I will ask that because in Romania we don't have a proper bike fitting shop.
I found brand new 2020 S Works Venge in size 61. And I don't know if will fit me properly.
Currently I have an Canyon Aerod in size 2XL, but my stem is 80mm long (i had 110 and i can't ride that long) and my saddle is all the way to the front.
Some people told me the frame is too big for me and I should go down a size.
On my canyon I have only 7.5mm of spacers, I removed 20mm a few months ago.
https://geometrygeeks.bike/compare/cany ... e-2019-58/
Both 58 and 61 Venges are smaller than my current bike
My inseam is 95 cm and my height is 195 cm, my saddle height is 85cm on my current bike ( from bb to the top of the saddle).
I'm not sure if a 58 frame have enough seat post length
I found brand new 2020 S Works Venge in size 61. And I don't know if will fit me properly.
Currently I have an Canyon Aerod in size 2XL, but my stem is 80mm long (i had 110 and i can't ride that long) and my saddle is all the way to the front.
Some people told me the frame is too big for me and I should go down a size.
On my canyon I have only 7.5mm of spacers, I removed 20mm a few months ago.
https://geometrygeeks.bike/compare/cany ... e-2019-58/
Both 58 and 61 Venges are smaller than my current bike
My inseam is 95 cm and my height is 195 cm, my saddle height is 85cm on my current bike ( from bb to the top of the saddle).
I'm not sure if a 58 frame have enough seat post length
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- that canyon is way too big. that's a fact.adriant wrote: ↑Fri Sep 17, 2021 8:53 amHi, I have a question. I will ask that because in Romania we don't have a proper bike fitting shop.
I found brand new 2020 S Works Venge in size 61. And I don't know if will fit me properly.
Currently I have an Canyon Aerod in size 2XL, but my stem is 80mm long (i had 110 and i can't ride that long) and my saddle is all the way to the front.
Some people told me the frame is too big for me and I should go down a size.
On my canyon I have only 7.5mm of spacers, I removed 20mm a few months ago.
https://geometrygeeks.bike/compare/cany ... e-2019-58/
Both 58 and 61 Venges are smaller than my current bike
My inseam is 95 cm and my height is 195 cm, my saddle height is 85cm on my current bike ( from bb to the top of the saddle).
I'm not sure if a 58 frame have enough seat post length
- If you have problems with reach (I know I have) you shouldn't slam your stem given that for every 10mm you reduce its height, your reach increases by around 3mm (it depends on head tube angle but I find this a good rule of thumb)
- The venge numbers you see there (and the same for the sl7) are somehow incorrect given that the venge requires a mandatory 10mm headset spacer that basically raises the stack by... 10mm and reduces the reach by around 3mm (the rule of thumb above) - I usually look instead at the sl6 geometry numbers given that the sl6 doesnt "suffer" from that situation.
In conclusion, with a 58 venge AND 30mm of spacers (I know it's not the prettiest thing but for me proper fit is more important) puts you in a 100 to 110mm stem again which makes much more sense. Go with a 58 and accept some spacers in it and you'll get a much more appropriate handling bike.
With the venge you can also get a 0-offset seatpost and put that saddle in the same position as you have now but centered in the rails I guess. Finally, also take into account the reach of the handlebar given that what you should be concerned with is total effective reach (reach to the hoods).
Yea my bad, in my mind spacers are without the mandatory spacer, in my mind that is a part of headset. But yea I have the 20 mm mandatory spacer, one 5mm and one 2.5mm
the venge spacer is 17mm and the stack and reach of sl6, venge and sl7 is exactly the samepmprego wrote: ↑Fri Sep 17, 2021 9:50 am- that canyon is way too big. that's a fact.adriant wrote: ↑Fri Sep 17, 2021 8:53 amHi, I have a question. I will ask that because in Romania we don't have a proper bike fitting shop.
I found brand new 2020 S Works Venge in size 61. And I don't know if will fit me properly.
Currently I have an Canyon Aerod in size 2XL, but my stem is 80mm long (i had 110 and i can't ride that long) and my saddle is all the way to the front.
Some people told me the frame is too big for me and I should go down a size.
On my canyon I have only 7.5mm of spacers, I removed 20mm a few months ago.
https://geometrygeeks.bike/compare/cany ... e-2019-58/
Both 58 and 61 Venges are smaller than my current bike
My inseam is 95 cm and my height is 195 cm, my saddle height is 85cm on my current bike ( from bb to the top of the saddle).
I'm not sure if a 58 frame have enough seat post length
- If you have problems with reach (I know I have) you shouldn't slam your stem given that for every 10mm you reduce its height, your reach increases by around 3mm (it depends on head tube angle but I find this a good rule of thumb)
- The venge numbers you see there (and the same for the sl7) are somehow incorrect given that the venge requires a mandatory 10mm headset spacer that basically raises the stack by... 10mm and reduces the reach by around 3mm (the rule of thumb above) - I usually look instead at the sl6 geometry numbers given that the sl6 doesnt "suffer" from that situation.
In conclusion, with a 58 venge AND 30mm of spacers (I know it's not the prettiest thing but for me proper fit is more important) puts you in a 100 to 110mm stem again which makes much more sense. Go with a 58 and accept some spacers in it and you'll get a much more appropriate handling bike.
With the venge you can also get a 0-offset seatpost and put that saddle in the same position as you have now but centered in the rails I guess. Finally, also take into account the reach of the handlebar given that what you should be concerned with is total effective reach (reach to the hoods).
Received my used venge but it didn't come with grommets. I found the part number for the grommet that goes in the chainstay exit hole. The manual doesn't mention any grommet for the FD wire exit, though. Is there supposed to be one? Seems like a place for water ingress if there is no grommet
That info is incomplete. The headset cover might be 12mm but you also need an intermediate spacer between stem and headset cover. That's the one that guides your brake lines into the headtube. It measures another 5mm. So in total we are back at 17mm as it was posted before.BigBoyND wrote:For anyone referencing this thread for fit info, the regular Venge spacer (headset cover) is 12mm unless you are using the one for standard stems. Only that one is 17mm
-
- Posts: 41
- Joined: Tue Jul 06, 2021 9:29 am
Hi team,
I'm looking at a mint condition second hand venge, size 54. I am 178cm, cant remember my inseam length but it feels like it should be the right size. Does anyone have pointers around what I should be looking for or what questions to ask buying used? The bike looks like it's hardly been ridden, and is being sold by the LBS on behalf of a customer.
Cheers
I'm looking at a mint condition second hand venge, size 54. I am 178cm, cant remember my inseam length but it feels like it should be the right size. Does anyone have pointers around what I should be looking for or what questions to ask buying used? The bike looks like it's hardly been ridden, and is being sold by the LBS on behalf of a customer.
Cheers
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 41
- Joined: Tue Jul 06, 2021 9:29 am
How did you prop your bike up to get these photos??